CISCO 2901/K9 2900 Series Integrated Services Router
by Cisco
| Product Code | C2951-SEC/K9 |
| Bundle | Cisco 2951 Voice Sec. Bundle, PVDM3-32, UC and SEC License PAK |
| Rack Units | 2U |
| Interfaces | 3 integrated 10/100/1000 Ethernet ports with 1 port capable of RJ-45 or SFP connectivity |
| Expansion Slot(s) | 2 service module slot 1 Internal Service Module slot 3 onboard digital signal processor slots 4 Enhanced high-speed WAN interface card (EHWIC) slots |
| UPC | CISCO 2901/K9 |
|---|---|
| Model Number | 2960/k9 |
| SKU | 17259 |
Reviews
This product does not have any reviews yet.
Add your reviewDescription
CISCO 2901- K9 2900 Series Integrated Services Router
CISCO 2901- K9 2900 Series Integrated Services Router from the leading Cisco dealer in Nairobi Kenya, buy online CISCO 2901- K9 2900 Series Integrated Services Router and have it delivered.
Cisco 2900 Series Integrated Services Routers build on 25 years of Cisco innovation and product leadership. The new platforms are architected to enable the next phase of branch-office evolution, CISCO 2901- K9 2900 Series Integrated Services Router providing rich media collaboration and virtualization to the branch while maximizing operational cost savings.
The Integrated Services Routers Generation 2 platforms are future-enabled with multi-core CPUs, support for high capacity DSPs (Digital Signal Processors) for future enhanced video capabilities, CISCO 2901- K9 2900 Series Integrated Services Router high powered service modules with improved availability, Gigabit Ethernet switching with enhanced POE, and new energy monitoring and control capabilities while enhancing overall system performance.
| Product Code | CISCO2901/k9 |
| Rack Units | 1U |
| Interfaces | 2 integrated 10/100/1000 Ethernet ports |
| Expansion Slot(s) | 2 onboard digital signal processor (DSP) slots 4 enhanced high-speed WAN interface card slots 1 onboard Internal Service Module for application services |
| RAM | 512 MB (installed) / 2 GB (max) |
| Flash Memory | 256 MB (installed) / 8 GB (max) |
| Dimensions | 43.9 cm x 43.8 cm x 4.5 cm |
| Package Weight | 11.48 Kg |
Product Details
Figure 2 shows the front panel of the Cisco 2901 router with ports and LEDs. 
Note:
? SYS ? ACT ? POE ? On/Off switch ? AC power connector
Table 2 shows the LEDs area description
| LED | Color | Description |
| SYS | Solid green | Solid green indicates normal operation. |
| Blinking green | System is booting or is in ROM monitor mode. | |
| Amber | System error. | |
| Off | Power is off or system board is faulty. | |
| ACT | Green | Solid or blinking indicates packet activity between the forwarding and routing engine and any I/O port. |
| Off | No packet transfers are occurring. | |
| PoE | Green | PoE is available. |
| Amber | Power supply is not supplying PoE power. |
Figure 3 shows the back panel of the Cisco 2901 router with LEDs. 
Note
Compact flash 0 and 1 (0, right) . ISM ?,PVDM3 0 and 1 (0, right) ? EN (Enable USB console) ? EN (Enable RJ-45 console) ? S (Speed) ? L (Link) Table 3 shows some LEDs description.
| LED | Color | Description | Location |
| CompactFlash 1 | Green | Flash memory is busy. | Back Panel |
| Amber | Initialized with error. | ||
| Blinking Green then turns off | CompactFlash is ready for removal. | ||
| CompactFlash 0 | Green | Flash memory is busy. | Back Panel |
| Amber | Initialized with error. | ||
| Blinking Green then turns off | CompactFlash is ready for removal. | ||
| S (Speed) | 1 blink + pause | GE port operating at 10 Mb/s. | Back Panel |
| 2 blink + pause | GE port operating at 100 Mb/s. | ||
| 3 blink + pause | GE port operating at 1000 Mb/s. | ||
| L (Link) | Green | GE link is established. | Back Panel |
| Off | No GE link is established. | ||
| EN (RJ-45 console port) | Green | The RJ-45 console port is active. | Back Panel |
| EN (USB serial console port) | Green | The USB console port is active. | Back Panel |
| ISM | Green | Initialized. | Back Panel |
| Amber | Initialized with error. | ||
| Off | Not installed. | ||
| PVDM 0, and 1 | Green | PVDM is initialized. | Back Panel |
| Amber | PVDM is detected but not initialized. | ||
| Off | No PVDM installed. |
