Cisco Catalyst 2960X-48FPS-L 48 ports POE managed Switch

by Cisco

(KES 230,000 exc VAT) KES 266,800

Cisco Catalyst 2960X-48FPS-L 48 ports managed Switch

Expansion / Connectivity: 48 x 1000Base-T 10Base-T/100Base-TX/1000Base-T - RJ-45 - RJ-45 PoE+ - 30 W
Power: Internal power supply
Miscellaneous: 232,610 hours
Software / System Requirements: Cisco IOS LAN Base
 

Cisco Catalyst 2960X-48FPS-L - Switch - managed - 48 x 10/100/1000 (PoE+) + 4 x Gigabit SFP - desktop, rack-mountable - PoE+ (740 W)

Model Number2960X-48FPS-L
SKU17300

Reviews

This product does not have any reviews yet.

Add your review

Description

Cisco Catalyst 2960X-48FPS-L 48 ports managed Switch 

Cisco Catalyst 2960X-48FPS-L 48 ports managed Switch from the leading cisco dealer in Nairobi Kenya, buy online Cisco Catalyst 2960X-48FPS-L 48 ports managed Switch and have it delivered.

 

Cisco Catalyst 2960-X series switches provide a range of security features to limit access to the network and mitigate threats.

Redundancy and resiliency

Cisco Catalyst 2960-X series switches offer a number of redundancy and resiliency features to prevent outages and help ensure that the network remains available.

Enhanced Quality of Service

The Cisco Catalyst 2960-X series switches offers intelligent traffic management that keeps everything flowing smoothly. Flexible mechanisms for marking, classification, and scheduling deliver superior performance for data, voice, and video traffic, all at wire speed.

Intelligent Power over Ethernet Plus

Cisco Catalyst 2960-X series switches support both IEEE 802.3af Power over Ethernet (PoE) and IEEE 802.3at PoE+ to deliver lower total cost of ownership for deployments that incorporate Cisco IP phones, Cisco Aironet wireless access points, or other standards-compliant PoE/PoE+ end devices.

Application visibility

Catalyst 2960-X series switches support NetFlow Lite, which enables IT teams to understand the mix of traffic on their network and identify anomalies by capturing and recording specific packet flows. NetFlow Lite supports flexible sampling of the traffic,

General
Device Type Switch - 48 ports - managed - stackable
Enclosure Type Desktop, rack-mountable 1U
Subtype Gigabit Ethernet
Ports 48 x 10/100/1000 (PoE+) + 4 x Gigabit SFP
Power Over Ethernet (PoE) PoE+
PoE Budget 740 W
Performance Switching capacity: 216 Gbps | Forwarding performance (64-byte packet size): 107.1 Mpps
Capacity Virtual interfaces (VLANs): 1023
Jumbo Frame Support 9216 bytes
Max Units In A Stack 8
Remote Management Protocol SNMP 1, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, SNMP 2c, HTTP, TFTP, SSH, CLI
Authentication Method Kerberos, Secure Shell (SSH), RADIUS, TACACS+
Features Layer 2 switching, DHCP support, power over Ethernet (PoE), auto-negotiation, ARP support, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, Intrusion Detection System (IDS), IPv6 support, Rapid Spanning Tree Protocol (RSTP) support, Multiple Spanning Tree Protocol (MSTP) support, Dynamic Trunking Protocol (DTP) support, Port Aggregation Protocol (PAgP) support, Trivial File Transfer Protocol (TFTP) support, Access Control List (ACL) support, RADIUS support, SSH support, Jumbo Frames support, MLD snooping, Dynamic ARP Inspection (DAI), PoE+, Cisco EnergyWise technology, Unicast Reverse Path Forwarding (URPF), Uni-Directional Link Detection (UDLD), Rapid Per-VLAN Spanning Tree Plus (PVRST+), IPv4 support, Shaped Round Robin (SRR), Link Aggregation Control Protocol (LACP), MAC Address Notification, Remote Switch Port Analyzer (RSPAN), NetFlow, Hot Standby Router Protocol (HSRP) support, Energy Efficient Ethernet, Multicast VLAN Registration (MVR), Class of Service (CoS), Cisco FlexStack Plus
Compliant Standards IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.3ae, IEEE 802.1s, IEEE 802.1ae, IEEE 802.1ab (LLDP), IEEE 802.3at, IEEE 802.3az, IEEE 802.1AX
Processor : 600 MHz
RAM 512 MB
Flash Memory 128 MB
Status Indicators Port status, port transmission speed, port duplex mode, system, RPS (Redundant Power Supply), PoE, link/activity
Expansion / Connectivity
Interfaces 48 x 1000Base-T 10Base-T/100Base-TX/1000Base-T - RJ-45 - RJ-45 PoE+ - 30 W | 1 x console console - RJ-45 - RJ-45 | 1 x mini-USB console - mini-USB Type B - Type B management | 2 x USB Type A | 1 x 1000Base-TX 10Base-T/100Base-TX - RJ-45 - RJ-45 management | 4 x SFP (mini-GBIC) - SFP uplink
Expansion Slots 1 (total) / 1 (free) x Stacking Module slot
Power
Power Device Internal power supply
Power Redundancy Optional
Voltage Required AC 120/230 V (50/60 Hz)
Features Redundant Power System (RPS) connector
Miscellaneous
MTBF 232,610 hours
Compliant Standards CISPR 22 Class A, BSMI CNS 13438 Class A, CISPR 24, EN 61000-3-2, EN 61000-3-3, EN55024, EN55022 Class A, AS/NZS 60950-1, ICES-003 Class A, RoHS, FCC CFR47 Part 15, UL 60950-1 Second Edition, CSA C22.2 No. 60950-1 Second Edition, EN 60950-1 Second Edition, IEC 60950-1 Second Edition, Directive 2011/65/EU, VCCI Class A, KN24, KN22 Class A, EN 300386
Software / System Requirements
Software Included Cisco IOS LAN Base
Dimensions & Weight
Width 17.5 in
Depth 14.5 in
Height 1.8 in
Weight 12.79 lbs
Manufacturer Warranty
Service & Support Limited warranty - advance parts replacement - lifetime - response time: next business day | Technical support - consulting - 90 days
Environmental Parameters
Min Operating Temperature 23 °F
Max Operating Temperature 113 °F
Humidity Range Operating 10 - 95% (non-condensing)
Min Storage Temperature -13 °F
Max Storage Temperature 158 °F
Humidity Range Storage 10 - 95% (non-condensing)