APC 10KVA , Smart-UPS SRT 10000VA 230V, SRT10KXLI

by APC

KES 985,000 Excl. Tax


This product does not have any reviews yet.

Add your review


10KVA APC Smart-UPS SRT 10000VA 230V SRT10KXLI 

10KVA APC Smart-UPS SRT 10000VA 230V SRT10KXLI Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.


APC Smart-UPS SRT 10000VA UPS automatic internal bypass Supplies utility power to the connected loads in the event of a UPS power overload or fault. APC Smart-UPS SRT 10000VA UPS Plug and play external batteries Ensures clean, uninterrupted power to the loads when adding extra runtime to the UPS.


APC Smart-UPS SRT 10000VA replaceable batteries Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)


LED status indicators
Quickly understand unit and power status with visual indicators.
Serial connectivity
Provides management of the UPS via a serial port.
InfraStruXure Manager Compatible
Enables centralized management via the APC InfraStruXure Manager.
Network manageable
Most models provide remote power management options of the UPS over the network. Many do not have NMC embedded.
Customize UPS capabilities with management cards.


Audible alarms
Provides notification of changing utility power and UPS power conditions
Disconnected battery notification
Warns when a battery is not available to provide backup power.
Predictive failure notification.
Provides early-warning fault analysis ensuring proactive component replacement.
Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.
User-replaceable batteries
Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)


Cold-start capable
Provides temporary battery power when the utility power is out.
Generator compatible
Ensures clean, uninterrupted power to protected equipment when generator power is used.
Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
Resettable circuit breaker
Easy recovery from overloads; no need to replace a fuse. (Not available on Wall Tap SKUs)
Frequency and voltage regulation
Gives higher application availability by correcting poor frequency and voltage conditions without using the battery.
Power conditioning
Protects connected loads from surges, spikes, lightning, and other power disturbances.
Input power factor correction
Minimizes installation costs by enabling the use of smaller generators and cabling.

APC Smart-UPS SRT 10000VA UPS specifications

Lead time
Usually in Stock
provided equipment
CD with software Documentation CD Installation guide Temperature probe USB cable Warranty card Web/SNMP management card
71.5 cm
43.2 cm
net weight
111.82 kg
26.3 cm
network frequency
40...70 Hz auto-sensing
number of input connectors
1 hard wire 3-wire (1P + N + E) 1 hard wire 5-wire (3P + N + E)
input voltage limits
100...275 V adjustable (half load) 173...476 V adjustable (half load) 160...275 V
220 V 240 V 380 V 415 V
input voltage
230 V 400 V 3 phases
rated power in W
10000 W
Maximum configurable power in W
10000 W
harmonic distortion
Less than 2 %
output frequency
50/60 Hz +/- 3 Hz sync to mains
220 V 240 V
crest factor
3 : 1
UPS type
Double conversion online
Wave type
Sine wave
output connector type
Hard wire 3-wire (H N + E) 1
nb of power socket outlets
6 IEC 60320 C13 3 IEC Jumpers 4 IEC 60320 C19
bypass type
Internal bypass (automatic and manual)
output voltage
230 V
product certifications
EN/IEC 62040-1 EN/IEC 62040-2
CE Mark
ambient air temperature for operation
0…40 °C
relative humidity
0…95 %
operating altitude
0...10000 ft
ambient air temperature for storage
-15…45 °C
storage altitude
0.00…15240.00 m
acoustic level
55 dBA
heat dissipation
1947 Btu/h
IP degree of protection
Batteries & Runtime
battery type
Lead-acid battery
number of battery filled slots
Battery recharge time
1.5 h
number of battery replacement quantity
liquid value
battery voltage
+/- 192 V (split battery referenced to neutral)
Communications & Management
free slots
control panel
Multifunction LCD status and control console
Audible and visible alarms prioritized by severity
Emergency power off
Surge Protection and Filtering
Surge energy rate
480 J
Packing Units
Package 1 Weight
126.82 kg
Package 1 Height
46.1 cm
Package 1 width
60 cm
Package 1 Length
100 cm
Offer Sustainability
EU RoHS Directive
Compliant EU RoHS Declaration
Mercury free
RoHS exemption information  
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins
Optimized Energy Efficiency
Energy efficient product