BV-650I-MSX APC 650VA EASY UPS

by APC

KES 10,500 Excl. Tax

Key Features

Output power capacity
375Watts / 650VA
Output Connections
(6) IEC 320 C13 (Battery Backup)
Nominal Output Voltage
230V
Nominal Input Voltage
230V
Input Connections
IEC-320 C14
Cord Length
1.52meters
Model NumberBV-650I-MSX
SKU13102

Reviews

This product does not have any reviews yet.

Add your review

Description

650VA APC EASY UPS BV 650VA 230V BV650I-MSX UPS 

650VA APC EASY UPS BV 650VA 230V BV650I-MSX UPS automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment. APC EASY UPS BV 650VA UPS allow flexibility for setup in tight locations and mounting on wall or other surfaces.

BV 650VA 230V BV650I-MSX UPS outlets provide abundant runtime for network gateway equipment and other critical low-power devices, allowing for hours of internet access during a power outage.

APC EASY UPS BV 650VA UPS Outlets provide abundant runtime for network gateway equipment and other critical low-power devices, allowing for hours of internet access during a power outage. 650VA 230V BV650I-MSX UPS Back up and protect your hardware and data during power outages, surges and spikes.

650VA APC EASY UPS Slim, modern design can be upright, flat, or wall-mounted to comfortably fit any electronics set-up and complement home. APC EASY UPS BV 650VA UPS Preserves battery life and maximizes runtime by correcting low voltages without discharging the battery.

APC EASY UPS BV 650VA UPS Provides early-warning fault analysis on batteries enabling timely preventive maintenance. 650VA 230V BV650I-MSX UPS Safeguard your Home UPS from overloads, excessive mains voltages, short circuits, installation mishaps and battery damage due to low voltage situations.

650VA 230V BV650I-MSX UPS specifications

Output - Output power capacity 375Watts / 650VA - Max Configurable Power (Watts) 375Watts / 650VA - Nominal Output Voltage 230V - Output Frequency (not synced) 50/60 Hz +/-1 Hz - Topology Line Interactive - Waveform type Stepped approximation to a sinewave - Transfer Time 6ms typical : 10ms maximum

Input - Nominal Input Voltage 230V - Input frequency 50/60 Hz +/- 5 Hz (auto sensing) - Input Connections IEC-320 C14 - Cord Length 1.52meters - Number of Power Cords 1 - Batteries & Runtime - Battery type Maintenance-free sealed Lead-Acid battery with suspended electrolyte: leakproof - Expected Battery Life (years) 3 - 5 - Efficiency View Efficiency Graph (Available in Technical Tab on site).

Communications & Management - Control panel LED Status display with On Line : On Battery - Audible Alarm Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm - Disclaimer: This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications. - Product link: https://www.apc.com/shop/hr/en/products/APC-EASY-UPS-BV-650VA-AVR-Universal-Outlet-230V/P-BV650I-MS Page 1 of 2

APC EASY UPS BV 650VA Technical Specifications 

  • Model: APC Easy UPS BV 650VA.
  • Capacity: 650VA/360W
  • Input Voltage: 230V
  • Output Voltage: 230V
  • Topology: Standby
  • Transfer Time: <10 ms
  • Automatic Voltage Regulation (AVR): Yes
  • Battery Type: Sealed Lead-Acid
  • Battery Runtime: Varies depending on the load
  • Surge Protection: Yes
  • Surge Energy Rating: 273 Joules
  • Number of Outlets: 3 x Universal sockets (C13)
  • Typical Recharge Time: 4-6 hours.
  • Audible Alarms: Battery backup warning, overload indicator
  • LED Indicators: Online, on battery, fault, overload
  • Communication Ports: None
  • Dimensions: 275 x 85 x 142 mm (W x H x D)
  • Weight: 3.3 kg
  • Operating Temperature: 0°C to 40°C
  • Operating Humidity: 0% to 90% non-condensing