Cisco WAP121 Wireless Access Point
Cisco WAP121 Wireless Access Point from the leading Cisco dealer in Nairobi Kenya, buy online Cisco WAP121 Wireless Access Point and have it delivered at your doorstep. WAP121-A-K9 Wireless-N Access Point with Single Point Setup from Cisco makes it easy to extend the reach of an existing network.
Cisco WAP121 Wireless Access Point a simplified setup process a network administrator can easily deploy multiple access points and with the dedicated configuration wizard the network settings can be easily monitored and managed. Cisco WAP121 Wireless Access Point Operating on the 2.4 GHz frequency and supporting 802.11b/g/n wireless networking standards this Cisco access point supports data transfer rates of up to 300 Mbps.
Cisco WAP121 Wireless Access Point Simply attach the WAP121 AP to an existing network via the single Fast Ethernet port and begin distributing up to four separate wireless connections with support for up to 4 SSIDs. Cisco WAP121 Wireless Access Point Once configured, the wireless connection can be secured using WPA/WPA2/WEP encryption standards along with access control management and rogue access point detection.
Cisco WAP121 Wireless Access Point specifications
- Device Type: Wireless access point
- Enclosure Type: Desktop, wall-mountable
- Connectivity Technology: Wireless, wired
- Data Link Protocol: IEEE 802.11b, IEEE 802.11g, IEEE 802.11n
- Frequency Band: 2.4 GHz
- Data Transfer Rate:
- Up to 300 Mbps (IEEE 802.11n)
- 54 Mbps (IEEE 802.11g)
- 11 Mbps (IEEE 802.11b)
- Capacity:
- Maximum number of configured SSIDs: 8
- Concurrent clients per radio: Up to 16 (32 total)
- Security: WPA, WPA2, 802.1X, WEP encryption, MAC address filtering, SSID broadcast disable
- Features:
- VLAN support
- Multiple SSID support
- Quality of Service (QoS)
- MIMO technology
- Captive portal
- Wi-Fi Multimedia (WMM) support
- IPv6 support
- Access Point (AP) mode and Wireless Distribution System (WDS) bridging
- Captive portal for guest access
- Wireless client isolation
- Antenna: Internal fixed omnidirectional antennas
- Interfaces:
- 1 x 10/100 Ethernet LAN port (RJ-45)
- Power over Ethernet (PoE) support
- Power: DC 12V, 1A, or PoE (Power over Ethernet)
- Dimensions (WxDxH): 15.2 cm x 13.5 cm x 3.5 cm
- Weight: 250 grams
- Environmental Parameters:
- Min Operating Temperature: 0°C
- Max Operating Temperature: 40°C
- Humidity Range Operating: 10 - 85% (non-condensing)
| GENERAL |
| Minimum Requirements |
802.11b, 802.11g, 802.11n wireless adapter with TCP/IP protocol installed per PC Switch/router with PoE support or PoE injector when used with PoE Web-based configuration: Java-enabled web browser |
| Standards |
IEEE 802.11n, 802.11g, 802.11b, 802.3af, 802.3u, 802.1X (security authentication), 802.1Q (VLAN), 802.1D (Spanning Tree), 802.11i (WPA2 security), 802.11e (wireless QoS), IPv4 (RFC 791), IPv6 (RFC 2460) |
| Ports |
LAN Fast Ethernet auto sensing, DC jack |
| Switch |
Power button (on/off) |
| Button |
Power (on/off) push button, Reset button |
| Cabling Type |
Category 5e or better |
| Antenna |
Internal antennas optimized for wall, ceiling, or desktop placement |
| LEDs |
Power, WLAN, LAN |
| Operating System |
Linux |
| PHYSICAL INTERFACE |
| Ports |
10BASE-T/100BASE-TX Ethernet, 12 VDC power with support for 802.3af PoE |
| Power Supply |
External 12 V 0.5 A DC power jack (Energy Star 2.0 compliant with Efficiency Level 5) and 802.3af PoE |
| Button |
Power (on/off) push button; Reset button |
| Lock |
Slot for Kensington lock |
| LED |
Power, Wireless, Ethernet |
| POE |
| PoE |
802.3af |
| Peak Power |
6 W |
| NETWORK |
| Supports |
VLAN, 802.1X supplicant, SSID to VLAN mapping, Auto channel selection, Spanning tree, Load balancing |
| Number of VLANs |
1 management VLAN plus 4 VLANs for Service Set ID (SSID) |
| Multiple SSIDs |
4 |
| IPv6 |
IPv6 host support IPv6 RADIUS, syslog, Network Time Protocol (NTP), etc |
| Layer 2 Features |
802.1Q-based VLANS, 4 active VLANS plus 1 management VLAN |
| SECURITY |
| Encryption |
WPA/WPA2/WEP & Enterprise authentication |
| Access Control |
Management access control list (ACL) plus MAC ACL |
| Secure Management |
HTTPS |
| Wi-Fi Protected Setup |
Soft WPS, no hardware push button |
| Broadcast System |
SSID |
| Detection Functions |
Rogue access point |
| MOUNTING OPTIONS |
| Options |
Desktop installation; mounting bracket included for easy ceiling or wall mounting |
| SECURITY |
| Lock |
Kensington lock slot |
| QUALITY OF SERVICE (QOS) |
| QoS |
Wi-Fi Multimedia & Traffic Specification (WMM TSPEC) |
| PERFORMANCE |
| Data Rate |
Up to 300 Mbps data rate (real-world throughput will vary) |
| User support |
Recommended up to 16 connected users, or 10 active users. |
| CONFIGURATION |
| Web User Interface |
Built-in web user interface for easy browser-based configuration (HTTP/HTTPS) |
| MANAGEMENT |
| Setup |
Single Point |
| Access Point Management |
Maximum per cluster: 4 Active clients per cluster: 40 |
| MANAGEMENT & PROTOCOLS |
| Management Protocols |
Web browser, Simple Network Management Protocol (SNMP) v3, Bonjour |
| Event Logging |
Event logging |
| Network Diagnostics |
Logging and packet capture |
| Web firmware upgrade |
Firmware upgradable through web browser, imported/exported configuration file |
| Dynamic Host Configuration Protocol (DHCP) |
DHCP client |
| Host |
IPv6 |
| WIRELESS |
| Frequency |
Single-band 2.4 GHz |
| Radio Type |
Single radio |
| Modulation Type |
OFDM (Orthogonal Frequency Division Multiplexing) |
| Channels |
1 to 13 (depending on country) Channels 1 through 11 (FCC) Channels 1 through 13 (ETSI) |
| Isolation |
Wireless isolation between clients |
| Internal Antennas |
Internal fixed PIFA antennas |
| Antenna Gain In dBi |
2 dBi each antenna |
| Transmitted Power |
802.11b @ 11 Mbps: 17 dBm 802.11g @ 54 Mbps: 13 dBm 802.11n @ HT20HT40, MCS15: 13 dBm |
| Receiver Sensitivity |
802.11b: 11 Mbps @ -86 dBm 802.11g: 54 Mbps @ -71 dBm 802.11n: 300 Mbps @ -64 dBm |
| Multiple SSIDs |
4 |
| Supports |
Wireless Distribution System (WDS), Roaming, Wireless VLAN map, WLAN security |
| WMM |
With unscheduled automatic power save and voice profile |
| Access Point Modes |
Access Point mode, WDS bridging, Workgroup Bridge mode |
| ENVIRONMENTAL |
| Power |
12 VDC, 0.5 A input, and IEEE802.3af compliant PoE |
| Certifications |
FCC class B, CE, IC, Wi-Fi |
| Operating Temperature |
32 to 104°F (0 to 40°C) |
| Storage Temperature |
-4 to 158°F (-20 to 70°C) |
| Operating Humidity |
10 to 85% non-condensing |
| Storage Humidity |
5 to 90% non-condensing |
| Mean Time Between Failures |
531189 hours |
| PHYSICAL |
| Dimensions (W x D x H) |
4.89 x 4.89 x 1.38? (124.17 x 124.17 x 35.00 mm) |
| Weight |
0.37 lb (0.16 kg) |
