Hikvision DS-KV8102-IM Video Door Station
Hikvision DS-KV8102-IM Video Door Station is an outdoor door intercom station designed to control entrance/exit to and from one room with either a button or card reader. This station comes with a camera to provide video from outside directly to an indoor tablet. Communication between the DS-KV8102-IM and an indoor station is easy with a built-in microphone and speaker that uses noise suppression and echo cancellation for a clear sound.
Hikvision Video Door Station is designed for single-resident configurations. It allows you to see and speak to visitors before letting them into your home. A built-in card reader enables you to have full control over who has access to your premises. Hikvision Video Door Station Two-way audio is possible thanks to a built-in speaker and omnidirectional microphone.
Noise suppression and echo cancellation help deliver the best possible audio quality. Hikvision Video Door Station communicates with IP cameras and other devices in your security system over a 10/100 Mbps self-adaptive Ethernet interface. Additionally, it can integrate with an NVR system. It is capable of sending alarm notifications and supports recording and playback on an NVR. This metal door station is IP65-rated, making it suitable for outdoor use.
Hikvision Video Door Station specifications
| System Parameters |
| Operation System: |
|
Embedded Linux Operation System |
| Processor: |
|
High-Performance Embedded SOC Processor |
| Audio Parameters |
| Audio Input: |
|
Built-in Omnidirectional Microphone |
| Audio Output: |
|
Built-in Loudspeaker |
| Audio Compression Standard: |
|
G.711 U |
| Audio Compression Rate: |
|
64 Kbps |
| Audio Quality: |
|
Noise Suppression and Echo Cancellation |
| Video Parameters |
| Camera: |
|
CMOS Low Illumination 1.3 MP HD Colorful Camera |
| Video Compression Standard: |
|
H.264 |
| Resolution: |
|
1280 x 720 |
| Video frame rate: |
|
25 fps |
| Network Parameters |
| Network Protocol: |
|
TCP/IP, RTSP |
| Ethernet: |
|
10/100 Mbps Self-Adaptive Ethernet |
| Access Control Parameters |
| Internal Card Reader: |
|
Built-in IC Card Reader |
| Exit button: |
|
Exit Button for Opening the Door |
| Door Magnetic Detection: |
|
Detects Door Magnetic Status |
| Light Supplement |
| Light Supplement Mode: |
|
IR Supplement |
| Alarm Parameters |
| Alarm Input: |
|
Door Magnetic Alarm, Tampering Alarm |
| Device Interfaces |
| I/O Output: |
|
1 |
| I/O Input: |
|
4 |
| RS-485: |
|
1 RS-485 Half-Duplex Port |
| Network Interface: |
|
1 RJ-45 10/100 Mbps Self-Adaptive Ethernet Interface |
| General |
| Power Supply: |
|
12 VDC/24 VDC, Power Over Network Cable (DS-KAD606, DS-KAD612) |
| Power Consumption: |
|
?12 W |
| Indoor Station Access Amount: |
|
4 |
| Material: |
|
Aluminum Alloy |
| Certification: |
|
FCC, IC, CE, C-TICK, ROHS, REACH, WEEE |
| Working Humidity: |
|
10% to 90% |
| Working Temperature: |
|
-40° C to +60° C (-40° F to 140° F) |
| Dimensions(L × W × H): |
|
182 mm × 100 mm × 33 mm (7.17" × 3.94" × 1.30") |
| IP Protection Level: |
|
IP65 |
