Nanostation LOCO M5 Outdoor CPE Access Point

by Ubiquiti

KES 9,700 Excl. Tax
  • 13 dBi antennae gain
  • Atheros MIPS 24KC, 400MHz processor
  •  1 X 10/100 BASE-TX (Cat. 5, RJ-45) Ethernet Interface
  •  24V, 0.5A surge protection 
  • 32MB SDRAM, 8MB Flash memory
  • 150 MBPS data transfer rate
Model NumberLOCO M5


This product does not have any reviews yet.

Add your review


Ubiquiti Nanostation LOCO M5 Outdoor MIMO CPE 

Nanostation LOCO M5 Outdoor MIMO CPE from Mtech is a cost-effective and reliable solution for high performance. It send signal up to 10km of range performance with 150Mbs signal strength.

this loco M5 can be set remotely through website. Nanostation Loco M5  CPE Features a panel antenna and dual-polarity performance, the NanoStation®M is ideal for Point-to-MultiPoint (PtMP) applications requiring high-performance CPE devices with a sleek form factor. NanoStationLoco  M5  can be deployed for Point-to-Point (PtP) bridging, wireless connectivity to a video surveillance system, or use as an airMAX® CPE.

software-enabled PoE output, the secondary Ethernet port can power an external device, such as a PoE security camera, for seamless IP video integration. Loco M5 versatile airOS® firmware technology enables high-performance, outdoor multi-point networking. airOS provides features such as wireless settings, bridge or routing configuration and system management services.

Ubiquitis loco M5 airMAX® technology is proven in millions of deployments worldwide, exhibiting outstanding performance in outdoor environments. The TDMA airMAX protocol enables unprecedented scalability, high throughput and low latency in unlicensed, multipoint networks.

NanoStation loco M5 advanced radio architecture and highly researched and developed firmware technology allowing throughput, stability and capacity performance rivaling even the highest-end WiMax networks . NanoStation M5 makes a perfect CPE device when pared with the Ubiquiti Rocket M5 and AirMax Sector or a Dish Antenna.
We also recommend to upgrade your AirOS software to the latest version by visiting UBNT Software Downloads. NanoStation loco M5 device can also be used for short LOS PtP links by placing one unit in Access Point WDS Mode and the other unit into Station WDS.

NanoStation M5 Specifications

  • Loco M5 Access point specifications

    Name  NanoStation Loco M5 5 GHz MIMO
    Code N2515
    Processor Atheros MIPS 24KC, 400MHz
    Memory 32MB SDRAM, 8MB Flash
    Antenna gain [dBi] 13
    Ethernet port  1 x 10/100BASE-TX
    Frequency range [MHz] 5470-5825
    Tx output power [dBm] 23
    Dimensions [mm] 163x31x80
    Power consumption [W] 5.5 (max)
    Supplying voltage [VDC] 24
    Operating temperature [°C] -30…80
    Operating humidity [%] 5…95