Secolink GSM module Kenya

by SECOLINK

KES 16,000 Excl. Tax

1. Turn the security system on or off. 2. Start/stop the engine(additional module is needed) 3. Get a reminder about security system’s status 4. Block the engine 5. Control Webasto heater (additional module is needed) 6. Get car’s location data (using GSM or GPS) 7. Adjust periodic status reporting 8. Change GSM communicator settings

SKU12412

Reviews

Leave a product review
or cancel

Description

Secolink GSM module Kenya

Secolink GSM module allows to control the SECOLINK alarm system remotely, over the GSM network. A customer can command the alarm system by calling GSV6U phone number through phone keypad in the same way as he (she) do it by using the alarm system keypad. When GSV6U is installed in system, the installer  can remotely adjust system settings with end-user permission.

Secolink GSM module specifications

Features GSV6U GSVU
Description GSM/GPRS communicator for SECOLINK modular systems GSM/GPRS communicator for SECOLINK modular systems
Product type Alarm system module Alarm system module
Data bus interface KRBUS, SERIAL Internal KRBUS
Data bus protocol KRBUS KRBUS
Alarm message for CMS CID by GPRS CID by GPRS
Reporting protocols for CMS E2, FIBRO, Kodinis KSP E2, FIBRO, Kodinis KSP
Compatible with SECOLINK control panels All SECOLINK control panels "P" series control panels only
Compatible with SG-SYSTEM II , III IP card Yes Yes
Phone Numbers for messaging 5 5
Alarm message for end user GSM call, SMS GSM call, SMS
Alarm message for end user by voice clip Yes Yes
Voice guide for end user Yes Yes
Recordable audio alarm messages Yes Yes
Available language for SMS English English
Available language for voice clip and guide English English
System remote control by GSM call Yes Yes
Ambient temperature value return by SMS Yes (KM20BT, KM24A/G) Yes (KM20BT, KM24A/G)
Remote system control by Android smart phone application Yes Yes
Remote system control by iPhone smart phone application Yes Yes
Maximum wiring distance to CP 300 m -
Power supply (DC) 9 - 14 V 9 - 14 V
Current consumption 180 mA 180 mA
Overall dimensions W x H in mm 71 x 76 71 x 76
Environmental compliance ROHS ROHS
Operating temperature From -10oC to +50oC From -10oC to +50oC
Interface for communicator settings programming USB USB
Interface for communicator firmware updating USB USB
Remote system programming via internet server by using MASCAD Yes Yes