Ubiquiti UAP-AC-PRO Unifi Access Point
by Ubiquiti
- 802.11 a/b/g/n/ac Wi-Fi Standards
- Range of up to 400'
- 2 x 10/100/1000 Ethernet Ports
- UniFi Controller Software
| Model Number | UAP-AC-PRO |
|---|---|
| SKU | 10888 |
Reviews
This product does not have any reviews yet.
Add your reviewDescription
Ubiquiti UAP-AC-PRO Unifi Access Point
Ubiquiti UAP-AC-PRO Unifi Access Point supports 802.11ac and speeds of up to 1300Mbps in the 5GHz radio band and up to 450Mbps in the 2.4GHz radio band.
UAP-AC-PRO offers simultaneous dual-band operation with 3x3 MiMO on both radio bands. It has a range of up to 122m (400ft) and two Gigabit Ethernet ports. UniFi AC Pro AP is a gigabit, 802.3af-powered access point suitable for indoor or outdoor use.
You can easily replace a standard UniFi AP using the same mounting hardware. UAP-AC-PRO Unifi Access Point Controller v4 software is a powerful, enterprise wireless software engine ideal for high-density client deployments requiring low latency and high uptime performance.
UAP-AC-PRO Unifi Access Point software-based capabilities, the UniFi virtual control plane allows for unlimited scalability under one centralized controller. Remotely access the UniFi Controller to upgrade deployed UniFi APs while in the field.
Ubiquiti UAP-AC-PRO Unifi Access Point specifications
- Model: Ubiquiti UniFi UAP-AC-PRO
- Wireless Standards: 802.11ac dual-band (2.4 GHz and 5 GHz)
- Wireless Speed:
- 2.4 GHz: Up to 450 Mbps
- 5 GHz: Up to 1300 Mbps
- Antenna Gain: 3 dBi (2.4 GHz), 3 dBi (5 GHz)
- Multiple SSIDs: Up to 4 SSIDs per radio
- Wi-Fi Security: WEP, WPA-PSK, WPA-Enterprise (WPA/WPA2, TKIP/AES)
- Power over Ethernet (PoE) Support: Yes, 802.3af PoE/802.3at PoE+
- Power Method: 48V Passive PoE (Injector not included)
- PoE Adapter Included: No (sold separately)
- Ports: 2 Gigabit Ethernet ports (1 for data, 1 for PoE)
- Maximum Power Consumption: 9W
- Mounting: Wall/Ceiling (Kits included)
- Dimensions (W x D x H): 196.7 x 196.7 x 35 mm (7.74 x 7.74 x 1.38 inches)
- Weight: 350 g (12.4 oz)
- Wireless Range: Up to 122 meters (400 feet)
- Wi-Fi Standards: 802.11a/b/g/n/ac
- MIMO: 3x3 MIMO technology
- Compatibility: UniFi Controller software for centralized management
- Guest Portal/Hotspot Support: Yes
- VLAN Support: Yes
- QoS (Quality of Service) Support: Yes
- Security: WEP, WPA-PSK, WPA-Enterprise (WPA/WPA2, TKIP/AES)
- Beamforming Support: Yes
- Weatherproofing: Indoor use only
| Dimensions | 196.7 x 196.7 x 35 mm (7.74 x 7.74 x 1.38") |
| Weight | 350 g (12.4 oz) 450 g (15.9 oz) with Mounting Kits |
| Networking Interface | (2) 10/100/1000 Ethernet Ports |
| Port | (1) USB 2.0 Port |
| Buttons | Reset |
| Antennas | (3) Dual-Band Antennas, 2.4 GHz: 3 dBi, 5 GHz: 6 dBi |
| Wi-Fi Standards | 802.11 a/b/g/n/ac |
| Power Method | Passive Power over Ethernet (48V), 802.3af/803.2at Supported (Supported Voltage Range: 44 to 57VDC) |
| Power Supply | 48V, 0.5A PoE Gigabit Adapter* |
| Maximum Power Consumption | 9 W 20 W with Optional Accessory |
| Max TX Power | 2.4 GHz: 22 dBm 5 GHz: 22 dBm |
| BSSID | Up to Four Per Radio |
| Power Save | Supported |
| Wireless Security | WEP, WPA-PSK, WPA-Enterprise (WPA/WPA2, TKIP/AES) |
| Certifications | CE, FCC, IC |
| Mounting | Wall/Ceiling (Kits Included) |
| Operating Temperature | -10 to 70° C (14 to 158° F) |
| Operating Humidity | 5 to 95% Noncondensing |
| Advanced Traffic Management | |
| VLAN | 802.1Q |
| Advanced QoS | Per-User Rate Limiting |
| Guest Traffic Isolation | Supported |
| WMM | Voice, Video, Best Effort, and Background |
| Concurrent Clients | 200+ |
| Supported Data Rates (Mbps) | |
| Standards | Data Rates |
| 802.11a | 6, 9, 12, 18, 24, 36, 48, 54 Mbps |
| 802.11n | 6.5 Mbps to 450 Mbps (MCS0 - MCS23, HT 20/40) |
| 802.11ac | 6.5 Mbps to 1300 Mbps (MCS0 - MCS9 NSS1/2/3, VHT 20/40/80) |
| 802.11b | 1, 2, 5.5, 11 Mbps |
| 802.11g | 6, 9, 12, 18, 24, 36, 48, 54 Mbps |
UAP-AC-PRO Unifi Access Point Specifications
quiti UniFi 802.11ac PRO Indoor/Outdoor
Ubiquiti Unifi Uap Ac Pro Access Point
