Automatic Remote Slide gate

Automatic Remote Slide gate can be controlled from a distance of 100m, hence solving the owner the trouble of alighting from the vehicle in order to open the gate. It works for gates up to 630kg and up to 40 feet long. It increases the security of the occupants as it is controlled remotely.

It's recommended to consult the manufacturer's installation manual and seek professional assistance if needed.

1. Preparation:

   • Determine the appropriate location for the sliding gate, considering factors like driveway layout, clearance, and aesthetics.
   • Obtain any necessary permits and check local regulations regarding gate installations.
   • Gather all required tools and equipment, including concrete, gate components, gate opener, electrical wiring, and safety accessories.

2. Foundation and Footings:

   • Dig and prepare a trench for the gate track or rail.
   • Pour concrete footings and anchor points for the gate track and gate posts.
   • Ensure proper alignment and leveling of the footings to prevent gate misalignment.

3. Gate Posts:

   • Install sturdy gate posts at each end of the sliding gate's path.
   • Attach the gate track or rail securely to the gate posts.

4. Gate Panels:

   • Assemble and install the sliding gate panels according to the manufacturer's instructions.
   • Ensure the gate panels move smoothly along the track without obstructions.

5. Gate Opener Installation:

   • Attach the gate opener motor to a secure mounting point, such as a concrete footing.
   • Follow the manufacturer's instructions to install the gate opener's components, including the drive chain or gear rack.

6. Electrical Wiring:

   • Install the necessary electrical wiring and conduit for power supply and control signals.
   • Connect the gate opener motor, safety devices, and control panel following the wiring diagram provided by the manufacturer.

7. Safety Accessories:

   • Install safety accessories, such as safety sensors, photo eyes, and edge detectors, to detect obstacles and prevent accidents.

8. Testing and Adjustments:

   • Test the gate's movement and ensure it operates smoothly along the track.
   • Adjust the gate opener settings, including open and close limits, sensitivity, and delay settings.

9. Programming and Integration:

   • Program the gate opener's control panel, remote controls, keypads, or any access control systems.
   • Integrate the gate opener with any existing security or home automation systems if applicable.

10. Final Checks:

• Inspect the gate installation for safety and security compliance.
• Test all safety features, such as obstacle detection and emergency stop.
• Make any necessary adjustments to ensure the gate functions correctly and safely.

Specs

• Gate weigh around 630 kilos and a length of 40 inch.
• One can control the gate from 100m range.
• The gate slide at a speed of 8.5 inch per second.
• Has power output of 200w and power input of 110v.