Cisco SF100-16 16 port switch
by Cisco
- 16 ports
- SF 100-16 model
- IEEE 802.1p, IEEE 802.3az, IEEE 802.3, IEEE 802.3u, IEEE 802.3x standards
- AC 120/230 V voltage
- 50/60 Hz frequency
- 1.4 Mpps, 3.2 Gbps value
- 9216 bytes frame supported
Model Number | SF100-16 |
---|---|
SKU | 1418 |
Reviews
This product does not have any reviews yet.
Add your reviewDescription
Cisco SF100-16 16 port switch
16 port Cisco SF100-16 port switch delivers basic network connectivity and reliability for small businesses, without complexity. Cisco SF100-16 provides Sixteen .
Cisco SF100-16 16 port switch 10/100 Ethernet ports and all of the features, expandability, and investment protection you expect from Cisco. 16 port ,Cisco switch does not have installation software and nothing to configure, its plug and play.
Cisco 100 Series switches work right out of the box, with no software to install and nothing to configure. Each switch port independently sets itself for the optimal speed and determines whether to run in half- or full-duplex mode automatically.
As a standards-based Cisco solution, Cisco 100 Series switches are also designed to immediately accommodate all of the devices in your network, SF100-16 port switch are designed to help conserve energy by optimizing power use without compromising performance, which protects our environment and reduces your energy costs.
Cisco SF100-16 16 port switch supports the Energy Efficient Ethernet (IEEE 802.3az) standard, which reduces energy consumption by monitoring the amount of traffic on an active link and putting the link into a sleep state during quiet periods. Cisco SF100-16 16 port switch Most of the switches have no fans, so they run silently and unobtrusively while lowering energy costs.
SF100-16 port switch are available with PoE ports on both Fast Ethernet and Gigabit Ethernet models. This capability simplifies the deployment of IP telephony, wireless, video surveillance, and other solutions by allowing you to connect and power network endpoints over a single Ethernet cable.
Cisco SF100-16 16 port switch no need to install separate power supplies for IP phones or wireless access points, you can take advantage of advanced
Cisco SF100-16 16-Port Unmanaged Fast Ethernet Switch Specification
-
Switch Type:
- Cisco SF100 Series Ethernet Switch
-
Ports:
- 16 Ethernet 10/100 ports (RJ-45)
-
Performance:
- Switching capacity: 3.2 Gbps
- Forwarding rate: 2.38 Mpps
-
Layer 2 Features:
- IEEE 802.1Q VLAN tagging and support for up to 64 VLANs
- Port-based VLANs
-
QoS (Quality of Service):
- Four egress queues per port
- Differentiated Services Code Point (DSCP) and IP Precedence support
- IEEE 802.1p Class of Service (CoS) support
-
Security Features:
- MAC address filtering
- Access Control Lists (ACLs)
-
Management and Monitoring:
- Basic management through a web-based GUI
-
Power Supply:
- AC input voltage: 100V to 240V AC
-
Dimensions and Weight:
- Dimensions (H x W x D): 1.1 x 10.55 x 4.13 inches (28 x 268 x 105 mm)
- Weight: Approximately 1.08 lbs (0.49 kg)
-
Operating Temperature:
- 32 to 104°F (0 to 40°C)
-
Operating Humidity:
- 10 to 90% non-condensing
Performance | |
Switching capacity | SF100D-05: 1 GbpsSF100D-08: 1.6 GbpsSF100D-08P: 1.6 GbpsSF100D-16: 3.2 GbpsSF100-16: 3.2 Gbps SF100D-16P: 3.2 Gbps SF100-24: 4.8 Gbps SF102-24: 8.8 Gbps SG100D-05: 10 Gbps SG100D-08: 16 Gbps SG100D-08P: 16 Gbps SG100-16: 32 Gbps SG100-24: 48 Gbps SG102-24: 48 Gbps |
Forwarding capacity | Forwarding rate in million packets per second (mpps) (based on 64-byte packets):SF100D-05: 0.74 mppsSF100D-08: 1.4. mppsS100D-08P: 1.2 mppsSF100D-16: 1.4 mpps SF100-16: 1.4 mpps SF100D-16P: 1.4 mpps SF100-24: 3.6 mpps SF102-24: 6.5 mpps SG100D-05: 7.4 mpps SG100D-08: 11.9 mpps SG100D-08P: 11.9 mpps SG100-16: 23.8 mpps SG100-24: 35.7 mpps SG102-24: 35.7 mpps |
Layer 2 Switching | |
Head-of-line (HOL) blocking | HOL blocking prevention |
Jumbo Frame | 9216 bytes |
Quality of Service (QoS) | |
Priority levels | 4 hardware queues |
Scheduling | Priority queuing and weighted round-robin (WRR) |
Class of service | 802.1p priority based |
Product Specifications | |
Ports | SF100D-05: 5 RJ-45 connectors for 10BASE-T/100BASE-TXSF100D-08: 8 RJ-45 connectors for 10BASE-T/100BASE-TXSF100D-08P: 8 RJ-45 connectors for 10BASE-T/100BASE-TX;SF100D-16: 16 RJ-45 connectors for 10BASE-T/100BASE-TXSF100D-16P: 16 RJ-45 connectors for 10BASE-T/100BASE-TX SF100-16: 16 RJ-45 connectors for 10BASE-T/100BASE-TX SF100-24: 24 RJ-45 connectors for 10BASE-T/100BASE-TX SF102-24: 24 RJ-45 connectors for 10BASE-T/100BASE-TX; with 2 combo mini-GBIC slots SG100D-08: 8 RJ-45 connectors for 10BASE-T/100BASE-TX/1000BASE-T ports SG100D-08P: 8 RJ-45 connectors for 10BASE-T/100BASE-TX/1000BASE-T ports SG100-16: 16 RJ-45 connectors for 10BASE-T/100BASE-TX/1000BASE-T ports SG100-24: 24 RJ-45 connectors for 10BASE-T/100BASE-TX/1000BASE-T ports with 2 combo mini-GBIC slots SG102-24: 24 RJ-45 connectors for 10BASE-T/100BASE-TX/1000BASE-T ports with 2 combo mini-GBIC slots All units: Automatic medium dependent interface (MDI) and MDI crossover (MDI-X); auto negotiated port for connecting 10-, 100-, 1000- Mbps devices |
PoE | SF100D-08P: 4 PoE ports with 33.12W dedicated power budgetSF100D-16P: 8 PoE ports with 64W dedicated power budgetSG100D-08P: 4 PoE ports with 33.6W dedicated power budget |
Cabling type | Unshielded twisted pair (UTP) Category 5 or better for 10BASE-T/100BASE-TX; 1000BASE-T recommended |
LEDs | System/PWR, Link/Activity, 100M,* PoE, Max PoE, Gigabit,* mini-GBIC**if present |
Standards | 802.3 10BASE-T Ethernet802.3u 100BASE-TX Fast Ethernet802.3ab 1000BASE-T Gigabit Ethernet802.3z Gigabit Ethernet802.3x flow control 802.1p priority IEEE 802.3az, Energy Efficient Ethernet 802.3af , Power Over Ethernet |
Environmental | |
DimensionsW x H x D | SF100D-05: 3.65 x 1.06 x 3.57 inches (92.6 x 27 x 90.6 mm)SF100D-08: 5.12 x 1.06 x 5.12 inches (130 x 27 x 130 mmSF100D-08P: 6.29 x 1.18 x 5.05 inches (160 x 30 x 128.5 mm)SF100D-16: 5.12 x 1.52 x 5.12 inches (130 x 38.5 x 130 mm)SF100-16: 11 x 1.75 x 6.7 inches (279.4 x 44.5 x 170 mm) SF100D-16P: 6.29 x 3.54 x 1.69 inches (160 x 90 x 43 mm) SF100-24: 11 x 1.75 x 6.7 inches (279.4 x 44.5 x 170 mm) SF102-24: 17.35 x 1.74 x 7.99 inches (440.6 x 202.82 x 44.32 mm) SG100D-05: 4.33 x 1.18 x 3.93 inches (110 x 30 x 100 mm) SG100D-08: 5.51 x 1.31 x 5.51 inches (140 x 33.35 x 140 mm) SG100D-08P: 6.29 x 1.18 x 5.05 inches (160 x 30 x 128.5 mm) SG100-16: 11 x 1.75 x 6.7 inches (279.4 x 44.5 x 170 mm) SG100-24: 17.35 x 1.74 x 7.99 inches (440.6 x 202.82 x 44.32 mm) SG102-24: 11 x 1.75 x 6.7 inches (279.4 x 44.5 x 170 mm) |
Unit weight | SF100D-05: 0.47 lb. (0.22 kg)SF100D-08: 0.83 lb. (0.38 kg)SF100D-08P: 1.2 lb. (0.545 kg)SF100D-16: 1.03 lb. (0.46 kg)SF100-16: 2.79 lb. (1.25 kg) SF100D-16P: 0.99 lb. (0.45 kg) SF100-24: 2.91 lb. (1.32 kg) SF102-24: 4.93 lb. (2.00 kg) SG100D-05: 0.70 lb. (0.32 kg) SG100D-08: 0.94 lb. (0.43 kg) SG100D-08P: 1.2 lb. (0.55 kg) SG100-16: 3.15 lb. (1.43 kg) SG100-24: 3.59 lb. (1.63 kg) SG102-24: 5.05 lb. (2.3 kg) |
Power | SF100D-05, SF100D-08: DC 12V, 500mASF100D-16, SG100D-08, SG100D-05: DC 12V, 1.0ASF100D-08P, SG100D-8P: DC 48V. 1.25ASF100-16, SF100D-16P, SF100-24, SG100-16, SG100-24, SG102-24: 100-240VAC, 50-60 Hz, internal, universal |
Certifications | UL (UL 60950), CSA (CSA 22.2), CE mark, FCC Part 15 (CFR 47) Class A |
Operating temperature | 32° to 104°F (0° to 40°C) |
Storage temperature | -4° to 158°F (-20° to 70°C) |
Operating humidity | 10% to 90%, relative, non-condensing |
Storage humidity | 10% to 90%, relative, non-condensing |
Package Contents | |
Cisco 100 Series Switch
Power cord/power adapter
Mounting hardware
Quick-start guide
|
|
Minimum Requirements |