GSM Control Panel
by SECOLINK
JA-101K offers:
- up to 50 wireless or BUS hardwired zones
- up to 50 user codes
- up to 8 sections
- up to 16 programmable outputs
- 20 independent calendars
- system reports to 8 users by SMS
- 8 users have option of voice and SMS reporting
- 5 ARC settings
- 4 selectable reports to ARC
| SKU | 9196 |
|---|
Reviews
This product does not have any reviews yet.
Add your reviewDescription
GSM Control Panel
GSM Control Panel offers flexible setting and allows easy protection for small premises, bigger family houses, offi ces and companies. The desired settings and the size of the system is programmed by F-link SW. GSM Control Panel has a built-in GSM/GPRS communicator on the board offering communication by voice, SMS or GPRS to end users or to ARC centers.
It is equiped with a 1 GB memory card on the board for saving event reports, a voice menu and messages, the storage of pictures and more. GSM Control Panel has a built-in keypad with backlit, remote 110/220 V power supply unit and battery 1.1 A*h, 3.7 V: not less than 12 hours of battery life. GSM Control Panel you can connect to Nord Air up to 31 wireless devices: security sensors, smoke detectors, water leak sensors, temperature sensors, relay and repeaters.
GSM Control Panel has a compact body, so an engineer will easily find a place for mounting the device. GSM Control Panel tracing paper with markings will allow for accurate drilling of fixing holes. The panel is wireless, so you do not need to pull wires and lay cable channels. It's simple and fast. GSM Control Panel has an interface of devices' settings, it is called the status panel.
Engineer sees number of zone, state and error signal level for each device. GSM Control Panel remotely connects to the Nord panel through the web interface of C.Nord Cloud and configures it with a Hubble configurator. The engineer configures the panel the same way as if he connects via USB. GSM Control Panel configuration is stored on the device and in the cloud. Therefore, even if you have a bad connection with the device, Hubble will load up immediately (from the cloud) and the engineer starts to work at
GSM Control Panel Specifications
| Power source | 230 V / 50 Hz, max. 0.1 A, security class II |
|---|---|
| Backup battery | 12V; 2.9Ah (2.2 to 7Ah) - not included! |
| Maximum time needed for battery recharge | 72 h |
| Max. continuous control panel current output | 400 mA |
| Max. continuous current output for 12 hour backup | 125 mA with a 2.6Ah battery |
| Max. number of enrolled devices | 50 |
| LAN communicator | no |
| Battery | A type (EN 50131-6) |
| QUAD-BAND GSM communicator | 850/900/1800/1900MHz |
| Operating frequency (with the JA-110R module) | 868.1 MHz ISM band |
| Invalid code-entries exceeded | After 10 incorrect code entries |
| Event memory | approx. 1 million of the latest events including date and time |
| Security rating | 2 according to EN 50131-1, EN 50131-3-6, EN 50131-5-3 |
| Operating environment | Class II indoor general (-10 to +40°C), according to EN 50131-1 |
| Radio transmission conformity | ETSI EN 300220 (R module), ETSI EN 301 419-1, EN 301 511 |
| EMC conformity | EN 50130-4, EN 55022, ETSI EN 301 489-7 |
| Security conformity | EN 60950-1 |
| Can be operated according to | ERC REC 70-03 |
| CLIP protocol (caller ID + SMS) | ETSI EN 300 089 |
