Ubiquiti PBE-5AC-400-ISO PowerBeam AC ISO 5GHz
by Ubiquiti
- 5150 - 5875 MHz frequency
- 25Dbi gain
- 64 MB DDR2, 16 MB Flash memory
- FCC, IC, CE approvals
- IEC 68-2-11 (ASTM B117), salt fog test
- IEC 68-2-5 at 40° C (104° F) UV test
| Model Number | PBE-5AC-400-ISO |
|---|---|
| SKU | 703 |
Reviews
This product does not have any reviews yet.
Add your reviewDescription
Ubiquiti PBE-5AC-400-ISO PowerBeam AC ISO 5GHz
Ubiquiti PBE-5AC-400-ISO PowerBeam AC ISO 5GHz400 from Mtech supports up to 150+ Mbps real TCP/IP throughput. Its Antenna Feed has a thin gray ring around the center of the cap to differentiate it from the PBE-M5-300 Antenna Feed.
ncorporating advanced engineering with proprietary airMAX ac technology, the PowerBeam ac ISO is ideal for deployments requiring maximum performance and RF isolation. Ubiquiti Networks launches the PowerBeam ac ISO, an airMAX ac Bridge that is ideal for deployments requiring maximum performance and RF isolation.
Improved Noise Immunity
The PowerBeam ac ISO directs RF energy in a tighter beamwidth, and its integrated isolator design improves RF isolation to spatially filter out interference. With its combination of focused beam directivity and RF isolation, the PowerBeam ac ISO blocks noise to improve noise immunity. This is especially important in an area crowded with other RF signals of the same or similar frequency.
Integrated Design
Ubiquiti's InnerFeed technology integrates the radio into the feedhorn of an antenna, so there is no need for a cable. This improves performance because it eliminates cable losses.
| PBE-5AC-400-ISO Specifications | |
|---|---|
| System Information | |
| Processor Specs | Atheros MIPS 74Kc, 560 MHz |
| Memory | 64 MB DDR2, 16 MB Flash |
| Networking Interface | (1) 10/100/1000 Ethernet Port |
| Physical / Electrical / Environmental | |
| Dimensions | 459 x 459 x 261 mm (18.07 x 18.07 x 10.28") |
| Weight | 3.22 kg (7.10 lb) |
| Power Supply | 24V, 0.5A Gigabit PoE |
| Power Method | Passive PoE (Pairs 4, 5+; 7, 8 Return) |
| Supported Voltage Range | 20-26VDC |
| Max Power Consumption | 8.5 W |
| Gain | 25 dBi |
| LEDs | (1) Power, (1) LAN, (4) WLAN |
| Signal Strength LEDs | Software-Adjustable to Correspond to Custom RSSI Levels |
| Channel Sizes | PtP Mode: 10/20/30/40/50/60/80 MHz PtMP Mode: 10/20/30/40 MHz |
| Max. VSWR | 1.5:1 |
| Built-In Mechanical Downtilt | ± 20° |
| Polarization | Dual Linear |
| Enclosure | Outdoor UV Stabilized Plastic |
| Mounting | Pole-Mount Kit Included |
| Wind Loading | 559 N @ 200 km/h (125.7 lbf @ 125 mph) |
| Wind Survivability | 200 km/h (125 mph) |
| ESD/EMP Protection | Air: ± 24 kV, Contact: ± 24 kV |
| Operating Temperature | -40 to 70° C (-40 to 158° F) |
| Operating Humidity | 5 to 95% Noncondensing |
| Salt Fog Test | IEC 68-2-11 (ASTM B117), Equivalent: MIL-STD-810 G Method 509.5 |
| Vibration Test | IEC 68-2-6 |
| Temperature Shock Test | IEC 68-2-14 |
| UV Test | IEC 68-2-5 at 40° C (104° F), Equivalent: ETS 300 019-1-4 |
| Wind-Driven Rain Test | ETS 300 019-1-4, Equivalent: MIL-STD-810 G Method 506.5 |
| Regulatory / Compliance Information | |
| Wireless Approvals | FCC, IC, CE |
| RoHS Compliance | Yes |
| Operating Frequency Summary (MHz) | |
| Worldwide | 5150 - 5875 MHz |
| USA | U-NII-1: 5150 - 5250 MHz U-NII-2A: 5250 - 5350 MHz U-NII-2C: 5470 - 5725 MHz U-NII-3: 5725 - 5850 MHz |
