Ubiquiti PowerBeam 5AC ISO (PBE-5AC-300-ISO)
by Ubiquiti
- MIPS 74Kc, 560 MHz processors
- 64 MB DDR2, 16 MB Flash memory
- FCC, IC, CE approvals
- 20-26 VDC voltage range
- IEC 68-2-11 (ASTM B117 salt fog test
- IEC 68-2-14 temperature shock
Model Number | PBE-5AC-300 |
---|---|
SKU | 707 |
Reviews
This product does not have any reviews yet.
Add your reviewDescription
Ubiquiti PBE-5AC-300 PowerBeam AC
Ubiquiti PBE-5AC-300 PowerBeam AC Mtech focus in one direction, the PowerBeam filters out noise, hence the quality of network signal is clean, hence the power beam is efficient in crowded places where network is equally needed
This device features a multi-radio architecture to power a revolutionary RF analytics engine. An independent processor on the PCBA powers a second, dedicated radio, which persistently analyzes the full 5 GHz spectrum and every received symbol to provide you with advanced RF analytics.
Data from the spectrum analysis and RF performance monitoring is displayed on the Main tab and airView Spectrum Analyzer of airOS V7. The Time Division Multiple Access (TDMA) airMAX protocol allows each client to send and receive data using pre-designated time slots scheduled by an intelligent AP controller.
This time slot method eliminates hidden node collisions and maximizes airtime efficiency, so airMAX technology provides performance improvements in latency, noise immunity, scalability, and throughput compared to other outdoor systems in its class. The airMAX engine with custom IC dramatically improves TDMA latency and network scalability. The custom silicon provides hardware acceleration capabilities to the airMAX scheduler, to support the high data rates and dense modulation used in airMAX ac technology.
The bridge supports high data rates, which require dense modulation: 256QAM – a significant increase from 64QAM, which is used in airMAX. With their use of proprietary airMAX ac technology, the bridge supports up to 450+ Mb/s real TCP/IP throughput.
Ubiquiti Networks PBE-5AC-300-US Specs
Frequency | 5 GHz |
Gain | 22 dBi |
Processor | Atheros MIPS 74Kc, 560 MHz |
Memory | 64 MB DDR2, 16 MB Flash |
Networking Interface | 1 x 10/100/1000 Ethernet Port |
Wireless Approvals | FCC, IC, CE |
RoHS Compliance | Yes |
Power Supply | 24 V, 0.5 A Gigabit PoE |
Power Method | Passive PoE (Pairs 4, 5+; 7, 8 Return) |
Voltage Range | 20-26 VDC |
Power Consumption | 5.5 W |
Operating Frequency | 5725 - 5850 MHz |
Wind Loading | 200.2 N @ 200 km/h (45 lbf @ 125 mph) |
Wind Survivability | 200 km/h (125 mph) |
LEDs | 1 x Power, 1 x LAN, 4 x WLAN |
Signal Strength LEDs | Software-Adjustable to Correspond to Custom RSSI Levels |
Channel Sizes | PtP Mode: 10/20/30/40/50/60/80 MHz PtMP Mode: 10/20/30/40 MHz |
Polarization | Dual Linear |
Enclosure | Outdoor UV Stabilized Plastic |
Mounting | Pole-Mount Kit Included |
ESD/EMP Protection | Air: ± 24 kV, Contact: ± 24 kV |
Operating Temperature | -40 to 158°F (-40 to 70°C) |
Operating Humidity | 5 to 95% non-condensing |
Salt Fog Test | IEC 68-2-11 (ASTM B117), Equivalent: MIL-STD-810 G Method 509.5 |
Vibration Test | IEC 68-2-6 |
Temperature Shock Test | IEC 68-2-14 |
UV Test | IEC 68-2-5 at 104°F (40°C), Equivalent: ETS 300 019-1-4 |
Wind-Driven Rain Test | ETS 300 019-1-4, Equivalent: MIL-STD-810 G Method 506.5 |
Dimensions | 12.8 x 12.8 x 10.1" (325 x 325 x 256 mm) |
Weight | 2.65 lb (1.20 kg) |