500VA APC Easy UPS BV 500VA 230V BV500I-MSX UPS 

500VA APC Easy UPS BV 500VA 230V BV500I-MSX UPS automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment.

APC Easy UPS BV 500VA 230V  Allow flexibility for setup in tight locations and mounting on wall or other surfaces. APC Easy UPS BV 500VA 230V battery Back up and protect your hardware and data during power outages, surges and spikes.

500VA APC Easy UPS BV 500VA 230V BV500I-MSX UPS Outlets provide abundant runtime for network gateway equipment and other critical low-power devices, allowing for hours of internet access during a power outage. BV500I-MSX UPS  Maximizes battery performance, life, and reliability through intelligent, precision charging.

BV500I-MSX UPS AVR Preserves battery life and maximizes runtime by correcting low voltages without discharging the battery.

500VA APC Easy UPS BV 500VA 230V BV500I-MSX UPS Specification

Output - Output power capacity 300Watts / 500VA - Max Configurable Power (Watts) 300Watts / 500VA - Nominal Output Voltage 230V - Output Frequency (not synced) 50/60 Hz +/-1 Hz - Topology Line Interactive - Waveform type Stepped approximation to a sinewave - Transfer Time 6ms typical : 10ms maximum

Input - Nominal Input Voltage 230V - Input frequency 50/60 Hz +/- 5 Hz (auto sensing) - Input Connections IEC-320 C14 - Cord Length 1.52meters - Number of Power Cords 1 - Batteries & Runtime - Battery type Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof - Expected Battery Life (years) 3 - 5 - Efficiency View Efficiency Graph (Available in Technical Tab on site)

Communications & Management - Control panel LED Status display with On Line : On Battery - Audible Alarm Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm - Disclaimer: This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications. - Product link: APC-EASY-UPS-BV-500VA-AVR-Universal-Outlet-230V/P-BV500I-MS Page 1 of 2

Technical Specifications - APC EASY UPS BV 500VA, AVR, Universal Outlet, 230V | BV500I-MS | Downloaded on 05/30/2019 (EST) Physical - Maximum Height 92MM, 9.25CM - Maximum Width 160MM, 16.05CM - Maximum Depth 305MM, 30.5CM - Net Weight 3.9KG - Shipping weight 4.2KG - Shipping Height 237MM, 23.7CM - Shipping Width 143MM, 14.3CM - Shipping Depth 373MM, 37.3CM - SCC Codes 1073130433829 8

Environmental - Operating Temperature 0 - 40 °C - Operating Relative Humidity 0 - 90 % - Operating Elevation 0-1968.3meters - Audible noise at 1 meter from surface of unit

APC 500VA Specifications

• Capacity: 500VA/300W
• Input voltage: 230V
• Output voltage: 230V
• Output connections: Universal Outlet x 2
• Input connection: IEC-320 C14
• Output waveform: Stepped approximation to a sinewave
• Transfer time: 6ms typical, 10ms maximum
• Surge energy rating: 273 Joules
• Battery type: Sealed, maintenance-free lead-acid
• Typical recharge time: 6 hours
• Backup runtime: Up to 10 minutes at half load, 3 minutes at full load
• Audible noise: Less than 40 dBA at 1 meter distance
• Operating temperature: 0°C to 40°C.
• Dimensions (H x W x D): 161 x 123 x 190 mm
• Weight: 4.3 kg