APC 10KVA , Smart-UPS SRT 10000VA 230V, SRT10KXLI
by APC
KES 985,000 Excl. Tax
| SKU | 13161 |
|---|
Reviews
Description
10KVA APC Smart-UPS SRT 10000VA 230V SRT10KXLI
10KVA APC Smart-UPS SRT 10000VA 230V SRT10KXLI Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
APC Smart-UPS SRT 10000VA UPS automatic internal bypass Supplies utility power to the connected loads in the event of a UPS power overload or fault. APC Smart-UPS SRT 10000VA UPS Plug and play external batteries Ensures clean, uninterrupted power to the loads when adding extra runtime to the UPS.
APC Smart-UPS SRT 10000VA replaceable batteries Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)
Manageability
LED status indicators
Quickly understand unit and power status with visual indicators.
Serial connectivity
Provides management of the UPS via a serial port.
InfraStruXure Manager Compatible
Enables centralized management via the APC InfraStruXure Manager.
Network manageable
Most models provide remote power management options of the UPS over the network. Many do not have NMC embedded.
SmartSlot
Customize UPS capabilities with management cards.
Serviceability
Audible alarms
Provides notification of changing utility power and UPS power conditions
Disconnected battery notification
Warns when a battery is not available to provide backup power.
Predictive failure notification.
Provides early-warning fault analysis ensuring proactive component replacement.
Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.
User-replaceable batteries
Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)
Protection
Cold-start capable
Provides temporary battery power when the utility power is out.
Generator compatible
Ensures clean, uninterrupted power to protected equipment when generator power is used.
Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
Resettable circuit breaker
Easy recovery from overloads; no need to replace a fuse. (Not available on Wall Tap SKUs)
Frequency and voltage regulation
Gives higher application availability by correcting poor frequency and voltage conditions without using the battery.
Power conditioning
Protects connected loads from surges, spikes, lightning, and other power disturbances.
Input power factor correction
Minimizes installation costs by enabling the use of smaller generators and cabling.
APC Smart-UPS SRT 10000VA UPS specifications
| Lead time |
Usually in Stock
|
|---|
| provided equipment |
CD with software Documentation CD Installation guide Temperature probe USB cable Warranty card Web/SNMP management card
|
|---|
| colour |
Black
|
|
|---|---|---|
| depth |
71.5 cm
|
|
| height |
43.2 cm
|
|
| net weight |
111.82 kg
|
|
| width |
26.3 cm
|
| network frequency |
40...70 Hz auto-sensing
|
|
|---|---|---|
| number of input connectors |
1 hard wire 3-wire (1P + N + E) 1 hard wire 5-wire (3P + N + E)
|
|
| input voltage limits |
100...275 V adjustable (half load) 173...476 V adjustable (half load) 160...275 V
|
|
| inputvolt_other |
220 V 240 V 380 V 415 V
|
|
| input voltage |
230 V 400 V 3 phases
|
| rated power in W |
10000 W
|
|
|---|---|---|
| Maximum configurable power in W |
10000 W
|
|
| harmonic distortion |
Less than 2 %
|
|
| output frequency |
50/60 Hz +/- 3 Hz sync to mains
|
|
| outputvolt_other |
220 V 240 V
|
|
| crest factor |
3 : 1
|
|
| UPS type |
Double conversion online
|
|
| Wave type |
Sine wave
|
|
| output connector type |
Hard wire 3-wire (H N + E) 1
|
|
| nb of power socket outlets |
6 IEC 60320 C13 3 IEC Jumpers 4 IEC 60320 C19
|
|
| bypass type |
Internal bypass (automatic and manual)
|
|
| output voltage |
230 V
|
| product certifications |
CE EAC IRAM RCM VDE
|
|
|---|---|---|
| standards |
EN/IEC 62040-1 EN/IEC 62040-2
|
|
| marking |
CE Mark
|
| ambient air temperature for operation |
0
40 °C
|
|
|---|---|---|
| relative humidity |
0
95 %
|
|
| operating altitude |
0...10000 ft
|
|
| ambient air temperature for storage |
-15
45 °C
|
|
| storage altitude |
0.00
15240.00 m
|
|
| acoustic level |
55 dBA
|
|
| heat dissipation |
1947 Btu/h
|
|
| IP degree of protection |
IP20
|
| battery type |
Lead-acid battery
|
|
|---|---|---|
| number of battery filled slots |
0
|
|
| Battery recharge time |
1.5 h
|
|
| number of battery replacement quantity |
2
|
|
| liquid value |
0
|
|
| battery voltage |
+/- 192 V (split battery referenced to neutral)
|
| free slots |
1
|
|
|---|---|---|
| control panel |
Multifunction LCD status and control console
|
|
| alarm |
Audible and visible alarms prioritized by severity
|
|
| Emergency power off |
Yes
|
| Surge energy rate |
480 J
|
|---|
| Package 1 Weight |
126.82 kg
|
|
|---|---|---|
| Package 1 Height |
46.1 cm
|
|
| Package 1 width |
60 cm
|
|
| Package 1 Length |
100 cm
|
| EU RoHS Directive |
Compliant EU RoHS Declaration
|
|
|---|---|---|
| Mercury free |
Yes
|
|
| RoHS exemption information | ||
| WEEE |
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins
|
|
| Optimized Energy Efficiency |
Energy efficient product
|
