Fiber Optic Cable

• Fiber Count: 24 cores
• Mode Type: Singlemode
• Core Diameter: 9 microns
• Cladding Diameter: 125 microns
• Fiber Type: OS2 (optimized for long-distance communication)
• Jacket Material: LSZH (Low Smoke Zero Halogen) for enhanced safety and reduced toxic emissions
• Cable Outer Diameter: Typically 8.5mm to 12mm (varies by manufacturer)
• Number of Fibers per Bundle: 24 fibers bundled together for organized installation
• Strength Member: Aramid yarn or glass fibers for enhanced tensile strength
• Operating Wavelength: 1310 nm & 1550 nm (optimized for long-distance transmission)
• Maximum Attenuation: ≤ 0.35 dB/km at 1310 nm; ≤ 0.20 dB/km at 1550 nm
• Minimum Bend Radius: 10x the outer diameter during installation; 20x during operation
• Temperature Range: -20°C to +70°C (Operating); -40°C to +85°C (Storage)
• Installation Method: Suitable for aerial, underground, or duct installation
• Compliance Standards: TIA/EIA-568-C.3, IEC 60793-2-50, RoHS compliant

• Core Configuration: 24 singlemode fibers
• Core Diameter: 9 µm
• Cladding Diameter: 125 µm
• Outer Diameter: Typically around 10.5 mm to 12 mm
• Armouring: Steel wire or aluminum armoured for enhanced protection
• Material: Low Smoke Zero Halogen (LSZH) or PVC outer sheath
• Maximum Attenuation:
  • ≤ 0.35 dB/km at 1310 nm
  • ≤ 0.20 dB/km at 1550 nm
• Operating Temperature Range: -40°C to +70°C
• Storage Temperature Range: -40°C to +85°C
• Tensile Strength: ≥ 1500 N
• Crush Resistance: ≥ 1500 N/100 mm
• Water Resistance: IP68 rated for submerged conditions
• Installation Method: Suitable for direct burial in underground applications
• Reinforcement: Additional moisture barriers for enhanced durability
• Applications: Telecommunications, data center interconnections, LAN/WAN backbones, FTTH deployments
• Weight: Approximately 100-120 kg/km (depending on armouring and sheath material)

General Specifications

• Product Type: Optical Distribution Frame (ODF)
• Rack Units: 1U
• Number of Ports: 24
• Connector Type: LC Duplex
• Connector Finish: UPC (Ultra Physical Contact)
• Fiber Type: Multimode (MM)

Adapter Panel

• Panel Type: Rack Mount
• Material: Cold-rolled steel with powder-coated finish
• Color: Typically black or gray
• Front Panel Ports: 24 LC Duplex adapters
• Rear Cable Management: Integrated management for efficient fiber routing and protection

Optical Performance

• Insertion Loss: ≤ 0.3 dB (typical)
• Return Loss: ≥ 50 dB for UPC
• Repeatability: ≤ 0.1 dB
• Durability: > 1000 mating cycles

Compatibility

• Fiber Modes: OM1, OM2, OM3, OM4, and OM5 compatible
• Cable Types: 50/125 μm and 62.5/125 μm multimode fibers
• Polishing Type: UPC polished connectors

Physical Dimensions

• Height: 1.75 inches (44.45 mm)
• Width: 19 inches (482.6 mm) standard rack width
• Depth: Typically around 10-12 inches (254-305 mm)

Environmental Specifications

• Operating Temperature: -40°C to +75°C
• Storage Temperature: -40°C to +85°C
• Humidity: 0% to 95% (non-condensing)

Installation Features

• Mounting: Standard 19-inch rack mountable
• Accessibility: Front access for easy installation and maintenance
• Cable Management: Includes rear cable management tray or brackets
• Labeling: Port numbering and labeling for easy identification

Compliance and Standards

• Industry Standards: Complies with TIA/EIA, IEC, and RoHS standards
• Fire Rating: Complies with UL 94V-0 flammability rating

Additional Features

• Design: Compact and lightweight design for efficient space utilization
• Security: Optional lockable doors for added security
• Accessories: Includes mounting screws, cable ties, and dust caps

• General Specifications

  • Product Type: Optical Distribution Frame (ODF)
  • Port Configuration: 24 Ports
  • Adapter Type: SC (Subscriber Connector) with UPC (Ultra Physical Contact) polish
  • Mode: Single-Mode (SM)
  • Configuration: Duplex (dual channel per port)
  • Rack Mount: 1U (one rack unit high)

  Performance Specifications

  • Insertion Loss:
    • Typically ≤ 0.3 dB per adapter
    • Maximum ≤ 0.5 dB per adapter
  • Return Loss:
    • Typically ≥ 50 dB (for UPC polish)
  • Operating Wavelength:
    • 1310 nm and 1550 nm (common for single-mode fibers)

  Connector Specifications

  • Connector Compatibility:
    • Designed for SC (Subscriber Connector) type fibers
  • Adapter Material:
    • Durable metal or plastic housing
    • High-precision ceramic or plastic sleeves for alignment
  • Sleeve Type:
    • Duplex sleeves for each port

  Mechanical Specifications

  • Durability:
    • Typically rated for ≥ 500 mating cycles per port
  • Insertion Force:
    • Designed to provide reliable connections with minimal insertion force

  Environmental Specifications

  • Operating Temperature:
    • Typically -20°C to 70°C
  • Storage Temperature:
    • Typically -40°C to 85°C
  • Humidity:
    • 95% relative humidity, non-condensing

  Rack Mounting

  • Rack Mount Type:
    • 1U rack mountable
  • Installation:
    • Designed to fit standard 19-inch racks or cabinets
  • Front Panel:
    • Includes labeled ports for easy identification and management

  Compliance and Certifications

  • Standards Compliance:
    • Meets or exceeds standards such as TIA/EIA-568 and IEC
  • Certifications:
    • RoHS compliant
    • UL Listed or similar safety certifications

  Applications

  • Network Environments:
    • Suitable for telecommunications, data centers, and local area networks (LAN)
  • Usage:
    • Ideal for organizing and managing single-mode fiber connections in a rack-mounted setup
    • Facilitates easy patching and routing of fiber optic cables within the ODF

General Specifications

• Product Type: Fiber Optic Splitter
• Configuration: 2x2 (2 inputs, 2 outputs)
• Splitter Type: Planar Lightwave Circuit (PLC)
• Housing Type: Bare steel tube
• Fiber Type: Singlemode
• Fiber Diameter: 250µm (micron)

Optical Performance

• Operating Wavelength: 1260 nm - 1650 nm (covers O, E, S, C, and L bands)
• Insertion Loss:
  • Typical: ≤ 4.5 dB
  • Maximum: ≤ 5.0 dB
• Uniformity: ≤ 0.5 dB (ensures consistent signal distribution across all outputs)
• Return Loss: ≥ 55 dB (minimizes back reflections)
• Polarization Dependent Loss (PDL): ≤ 0.2 dB (ensures stable performance across polarization states)
• Directivity: ≥ 55 dB (ensures minimal signal leakage between input and output ports)

Mechanical Specifications

• Steel Tube Dimensions:
  • Length: Approximately 30 mm - 50 mm
  • Diameter: Approximately 2 mm - 3 mm
• Fiber Length: Typically 1 meter (input and output fibers)
• Strength Member: Stainless steel for enhanced durability
• Weight: Lightweight design for easy handling and integration

Environmental Specifications

• Operating Temperature: -40°C to +85°C (suitable for a wide range of environmental conditions)
• Storage Temperature: -40°C to +85°C
• Humidity: 0% to 95% (non-condensing)

Installation Features

• Compatibility: Compatible with various fiber optic systems and networks
• Installation:
  • Simple installation with fusion splicing or mechanical splicing
  • Bare fiber ends allow for flexible integration
• Bend Radius: Supports standard bend radius requirements for 250µm fibers

Compliance and Standards

• Industry Standards:
  • Compliant with Telcordia GR-1209 and GR-1221 standards
  • RoHS compliant for environmental safety

Application Areas

• Telecommunications: Ideal for splitting optical signals in telecom networks
• Data Centers: Suitable for high-density fiber optic connections
• FTTH: Widely used in Fiber to the Home applications for signal distribution
• Passive Optical Networks (PON): Essential for splitting signals in PON architectures
• CATV: Used in cable television systems for efficient signal distribution

Additional Features

• Design: Compact and lightweight for easy integration and space-saving installations
• Durability: Steel tube housing provides mechanical protection and stability
• Reliability: High-quality PLC technology ensures long-term performance and reliability
• Customization: Available with various fiber lengths and connector options upon request

General Specifications

• Product Type: Planar Lightwave Circuit (PLC) Optical Splitter
• Configuration: 2x32 (2 input fibers and 32 output fibers for each input)
• Design: Bare PLC Splitter in a Steel Tube
• Fiber Type: Singlemode Fiber
• Fiber Buffer Diameter: 250µm (tight-buffered)

Optical Performance

• Wavelength Range: 1260 nm - 1650 nm (supports both 1310 nm and 1550 nm windows)
• Insertion Loss:
  • Typical: ≤ 14.0 dB (for each input channel)
  • Maximum: ≤ 15.0 dB
• Uniformity: ≤ 1.5 dB (ensures consistent signal distribution among outputs)
• Return Loss: ≥ 50 dB (minimizes back reflections)
• Directivity: ≥ 55 dB (reduces cross-talk between inputs and outputs)
• Polarization Dependent Loss (PDL): ≤ 0.2 dB (ensures consistent performance regardless of polarization)
• Splitting Ratio: Equal power distribution (1:32 for each input)

Fiber Specifications

• Fiber Mode Compatibility: ITU-T G.657A or G.652D compliant
• Input/Output Fiber Diameter: 250µm tight-buffered fiber
• Cable Jacket Material: Steel tube for added protection and mechanical strength

Physical Dimensions

• Enclosure Type: Steel tube
• Dimensions:
  • Length: Typically 60-100 mm (varies by design)
  • Diameter: Approximately 6-8 mm
• Weight: Approximately 50-100 grams (varies by design and length)

Environmental Specifications

• Operating Temperature: -40°C to +85°C (suitable for a wide range of environments)
• Storage Temperature: -40°C to +85°C
• Humidity: 0% to 95% (non-condensing, suitable for various environmental conditions)

Installation Features

• Mounting: Typically installed in splice trays or enclosures
• Cable Management: Requires external cable management solutions
• Accessibility: Accessible for splicing and maintenance
• Labeling: Clear port numbering and labeling for easy identification and troubleshooting

Compliance and Standards

• Industry Standards:
  • Telcordia GR-1209 and GR-1221 compliant for reliability and performance
  • IEC 61753-1 compliant for fiber optic interconnecting devices
  • RoHS compliant for environmental and safety regulations

Additional Features

• Design: Compact and durable steel tube design for robust protection
• Accessories: May include splice sleeves, protective caps, and installation instructions
• Reliability: High stability and reliability for various network applications, including FTTH, PON, and CATV
• Durability: Engineered for long-term operation with low maintenance requirements