Mercury 3KVA Line-interactive UPS
Mercury 3000KVA UPS Line-interactive UPS offers the advanced performance and durability that Mercury UPS brand is noted for. This microprocessor-controlled Mercury 3KVA UPS is designed to deliver the reliability that you expect from Mercury UPS products.
Mercury 3KVA UPS is equipped with boost and buck AVR, meaning you don’t need to invest in a separate AVR for it. With its clear LCD display, you can easily monitor the status of the UPS.
Here, check the features of the 3KVA Mercury ELITE 3000VA UPS: 3KVA mercury UPS is designed for market leaders who do not want to waste any precious time in case of power blackout.
Mercury UPS not only offers backup for devices but also connects the company most valued assets to clean power source hence preventing any damage that might occur due to power surge.
Mercury 3KVA UPS specifications
- Model: Mercury 3KVA Line-interactive UPS
- Capacity: 3000VA (3kVA)
- Technology: Line-interactive UPS
- Input Voltage: 220VAC
- Output Voltage: 220VAC
- Input Frequency Range: 45Hz – 65Hz
- Output Frequency: 50Hz or 60Hz (auto-sensing)
- Waveform: Simulated sine wave
- Transfer Time: ≤ 4ms
- Battery Type: Sealed lead-acid maintenance-free battery
- Battery Backup Time: Varies depending on the load
- Battery Recharge Time: Approximately 4 to 6 hours
- Communication Ports: USB, RS232
- Protection: Overload, short circuit, over-temperature
- Audible Alarm: Battery mode, low battery, overload, fault
- LED Indicators: AC mode, battery mode, fault, overload
- Operating Temperature: 0°C to 40°C
- Humidity: 0% – 90% non-condensing
- Dimensions: (W x D x H) 145mm x 400mm x 205mm
- Weight: Approximately 20kg
| CAPACITY | : |
| Rating | 3000VA |
| INPUT | : |
| Voltage | 220VAC / 230VAC / 240VAC |
| Voltage Range | 140 – 300VAC |
| OUTPUT | : |
| Voltage Regulation (Batt. Mode) | +/-10% |
| Frequency | 50Hz or 60Hz |
| Frequency Regulation(Batt. Mode) | +/-1Hz |
| Output Waveform | Modified Sine Wave |
| BATTERY | : |
| Battery Type | 12V/9.0AH x 4 |
| Recharge Time | 6-8 hrs to 90% after complete discharge |
| TRANSFER TIME | : |
| Typical | 10ms |
| INDICATOR | : |
| AC Mode | The left green LED lighting & the 1st to 4th green LEDs gradually lighting indicating load level |
| Battery Mode | The left green LED flashing & the 1st to 4th green LEDs gradually lighting indicating battery capacity |
| Fault Mode | Red LED Lighting |
| : | |
| Backup Mode | Sounding every 10 seconds |
| Low Battery | Sounding every 1 seconds |
| Overload | Sounding every 0.5 seconds |
| Fault | Continuously sounding. |
| PROTECTION | : |
| Full Protection | Discharge, Overcharge and Overload Protection |
| PHYSICAL | : |
| Dimension (mm) | 436(L) x 145(W) x 211.7(H) |
| ENVIRONMENT | : |
| Operating Environment | 0°C – 40°C |
| Noice Level | Less than 40dB |
No products in the cart.
Reviews
There are no reviews yet.