Mercury 1000VA 1kVA Elite PRO UPSÂ
Mercury 1000VA 1kVA UPS can be trusted for performance, reliability and durability, the Mercury 1KVA UPS brand is one of the top choices. Mercury 1000KVA Pro Line Interactive US is suitable for office and domestic IT equipment and electronics.
Mercury 1KVA UPS provides a relatively robust capacity for power backup to meet office as well as domestic power backup demands. With the Mercury 1000 KVA UPS you not only get power backup for your equipment but also enjoy solid protection for those appliances.
Mercury 1000VA UPS has a built-in AVR function of the Elite 2000 Pro means dangerous power fluctuations wont easily make mincemeat of your equipment. Mercury UPS is designed with advanced technology to deliver effocient performance and durability. HereÂ’s part of the benefits you enjoy in using a Mercury Elite Pro UPS:
Mercury Elite PRO 1000VA UPS Specification
- Capacity: 1000VA (1kVA)
- Topology: Offline/Standby
- Input Voltage: 220-240V AC
- Output Voltage: 220-240V AC
- Frequency: 50/60 Hz
- Transfer Time: <10 ms
- Waveform: Simulated Sine Wave
- Battery Type: Sealed Lead-Acid (SLA)
- Battery Backup Time: Typically 5-15 minutes (depending on load)
- Recharge Time: 6-8 hours.
- Outlets: Multiple output sockets for connecting devices
- Protection: Overload protection, short circuit protection, surge protection
- Communication: USB or RS232 interface for monitoring and control
- Dimensions: Varies depending on the specific model
- Weight: Varies depending on the specific model.
| Rating input voltage | 2000 VA / 1200 W |
| Rating input frequency | 60/50Hz (auto sensing) |
| Input phase | Single phase |
| Input socket | With Fuse |
| Cold Start (0 to 100% load) | Press the ON/OFF Switch |
| Input Range (220V) | 140-300 |
| Rating output(VA) | 2000 |
| Rating output (W) | 1200 |
| Power factor | 0.6 |
| Rating output voltage (V) | 220 |
| Waveform | Battery mode (simulated sine wave), AC mode(sine wave) |
| AC Voltage Regulation | ±10% (Battery mode) |
| Rear output socket | 4 x Universal – Battery backup |
| Waveform | Simulated Sine Wave (Battery mode) |
| Line Mode | Synchronize with the utility |
| Rating frequency | 60Hz or 50 Hz ± 1 Hz |
| Battery Mode | Yellow flashing |
| Short circuit protection Line Mode | Fuse & Firmware protection |
| Short circuit protection Battery Mode | Firmware Protection |
| Overload protection Line Mode | 110%±5%; Go to fault mode Line Mode after 5 minutes, 120%±5%; Go to fault mode immediately. |
| Overload protection Battery Mode | 110%±5%; Shutdown after 5 seconds, 120%±5%, Shutdown immediately |
| Indicators AC mode | Green Lighting |
| Indicators Battery Mode | Yellow Flashing |
| Indicators Fault | Red Lighting |
| Alarm Battery Mode | Sounding every 10 Seconds |
| Alarm Low Battery | Sounding every Second |
| Alarm Overload | Sounding every 0.5 second |
| Alarm Fault | Continuously sounding |
| Full Protection | Overload, discharge, and Overcharge protection |
| Transfer Time | Typical 2-6ms, 10ms max. |
| Transfer Time | Typical 2-6ms, 10ms max. |
| Communication Interface | Optional RS232/RJ11 |
| Battery and runtime Rating | 2 X 12V/9AH |
| Recharge time – Typical | 6-8 hours recover to 90% capacity |
| Charge current | About 1A at normal mode. |
| Dimension, D X W X H (mm) | 390 x 125 x 225 |
Conclusion
The Mercury Elite PRO 1000VA UPS is a reliable offline UPS designed to provide backup power and protection to your electronic devices during power outages or voltage fluctuations. With a capacity of 1000VA (1kVA), it offers sufficient power to keep your essential equipment running smoothly.
No products in the cart.
Reviews
There are no reviews yet.