No products in the cart.
- -15%
Type: Small First Aid Kit
Case Material:
- Options: Durable plastic, metal, or fabric (nylon or polyester)
- Water-Resistant: Often water-resistant or waterproof
- Color: Typically red or white with clear labeling
Dimensions:
- Size: Approximately 15 cm × 10 cm × 5 cm (5.9" × 3.9" × 2")
- Weight: Around 200 g to 500 g (0.44 lbs to 1.1 lbs), depending on contents
Contents:
- Bandages:
- Adhesive bandages (variety of sizes)
- Sterile gauze pads (small sizes)
- Elastic bandage (e.g., 5 cm width)
- Antiseptics:
- Antiseptic wipes or pads
- Alcohol swabs
- Dressings:
- Sterile non-stick dressings
- Adhesive wound dressing
- Tools:
- Small scissors or shears
- Tweezers
- Safety pins
- Pain Relief:
- Aspirin or ibuprofen tablets
- Miscellaneous:
- Cotton swabs
- Medical tape (1.25 cm width)
- First aid manual or instruction card
- Disposable gloves (latex-free)
- CPR face shield or mask
- Small flashlight or emergency whistle
- Triangular bandage
- Bandages:
Features:
- Organization: Compartments or pockets for organized storage
- Closure: Zipper or snap closure for secure sealing
- Portability: Compact and lightweight for easy carrying
- Labeling: Clearly labeled with contents and instructions
Intended Use:
- Settings: Home, office, car, travel, or outdoor activities
- Purpose: Basic treatment for minor injuries and emergencies
Compliance:
- Standards: May comply with ANSI or OSHA standards for workplace first aid kits
First Aid kit ( small)
Original price was: KSh 2,000.KSh 1,700Current price is: KSh 1,700. ( Ex VAT )Original price was: KSh 2,000.KSh 1,700Current price is: KSh 1,700. ( Ex VAT ) Add to cart - -7%
Control Panel (GSV4B)
- Zones:
- 4 wired zones (expandable to 12 with modules)
- Supports NO/NC loops, EOL, or DEOL wiring
- Outputs:
- 2 programmable outputs (expandable with modules)
- Open collector, max current: 150mA
- Communication Modules:
- Integrated GSM/GPRS communicator
- SMS, voice, and GPRS messaging support
- Remote control via mobile app (Secolink PRO)
- User Codes:
- Up to 30 user codes
- 1 installer code and 1 master code
- Event Log:
- 500 events with date and time stamps
- Partitions:
- Supports 2 partitions for flexible security management
- Power Supply:
- Input: 16V AC
- Backup Battery Support: 12V, 7Ah SLA (not included)
- Current Consumption:
- Standby: ~50mA
- Maximum: 350mA
Keypad (KGB2B)
- Display: LED indicators for system status
- Keypad Zones: 1 additional zone input
- User Interface: Ergonomic, backlit keys for easy operation
GSM/GPRS Features
- SMS Notifications: Instant alerts for events (arming, disarming, alarms, faults)
- Remote Arm/Disarm: Control via SMS or app
- Voice Call Notifications: Configurable alerts to multiple phone numbers
Additional Features
- Integration: Compatible with various wired detectors (motion, glass break, smoke, etc.)
- Tamper Protection: Tamper switches on control panel and accessories
- Firmware Updates: Supported via USB or over-the-air (OTA)
Environmental & Physical
- Operating Temperature: -10°C to +50°C
- Housing Material: Durable ABS plastic
- Dimensions:
- Control Panel: 230mm x 190mm x 65mm
- Keypad: 115mm x 90mm x 25mm
Kit Components
- Secolink GSV4B Control Panel
- KGB2B LED Keypad
- GSM/GPRS Module (Integrated)
- User Manual and Installation Guide
Secolink GSV4B Kit
Original price was: KSh 15,000.KSh 14,000Current price is: KSh 14,000. ( Ex VAT )Original price was: KSh 15,000.KSh 14,000Current price is: KSh 14,000. ( Ex VAT ) Add to cart - Zones:
- -6%
General Features
- Compatibility: Designed for use with Secolink alarm systems
- Network Support: Quad-band GSM (850/900/1800/1900 MHz) for global coverage
- SIM Card Slot: Standard SIM card support (GSM network)
Communication Features
- SMS Notifications:
- Real-time alerts for arming/disarming, alarms, faults, and system events
- Configurable to send SMS to up to 5 phone numbers
- Voice Call Alerts:
- Sends pre-recorded or synthesized voice notifications to designated numbers
- Supports up to 5 phone numbers for call alerts
- GPRS Communication:
- Data transmission for remote control via Secolink PRO app
- Compatible with monitoring station protocols (SIA IP, Contact ID over GPRS)
Remote Control
- Mobile App:
- Secolink PRO app for iOS and Android
- Features include system arming/disarming, output control, and status monitoring
- SMS Commands:
- Control system functions through predefined SMS commands
- Event Reporting: Instant reporting to monitoring stations or user devices
Programmable Features
- Outputs:
- Configurable open-collector outputs for controlling external devices
- Event Prioritization: Customize notification settings based on event type
Installation & Configuration
- Connection: Easy integration with Secolink control panels via onboard connectors
- Firmware Updates: Supports over-the-air (OTA) updates or manual updates via USB
Power Requirements
- Voltage Range: 9-16V DC
- Power Consumption:
- Standby: ~50mA
- During Transmission: ~300mA
Environmental & Physical
- Operating Temperature: -10°C to +50°C
- Humidity Resistance: Up to 95% non-condensing
- Dimensions: Compact design, approximately 85mm x 55mm x 20mm
- Weight: Lightweight, approximately 50 grams
Secolink GSM module Kenya
Original price was: KSh 17,000.KSh 16,000Current price is: KSh 16,000. ( Ex VAT )Original price was: KSh 17,000.KSh 16,000Current price is: KSh 16,000. ( Ex VAT ) Add to cart - -6%
General Features
- Type: GSM/GPRS Communication Module
- Model: GSV6U
- Functionality: Converts signals from alarm systems into SMS notifications or remote control commands via GSM network
- Compatibility: Works with Secolink alarm control panels and other compatible alarm systems
- Connectivity: GSM and GPRS support for remote alarm monitoring and control
- Communication Protocol: Compatible with SMS, GPRS, and Voice Call notification modes
- Network: Supports GSM 850/900/1800/1900 MHz frequency bands
- SIM Slot: Supports standard SIM cards (2G networks) for seamless operation
Power and Battery
- Power Supply: Powered by 12V DC, typically from the alarm control panel
- Backup Battery: Includes battery backup option to ensure operation during power outages (battery not included)
- Low Power Consumption: Designed for energy-efficient operation, suitable for 24/7 use in security applications
Security Features
- SMS Notification: Sends SMS alerts for various alarm events, including intrusion, fire, panic, and system faults
- Voice Call Alerts: Ability to make voice calls to preset phone numbers for immediate attention in emergencies
- Remote Arm/Disarm: Allows users to arm or disarm the alarm system remotely via SMS commands
- Multi-User Support: Can store and send alerts to multiple phone numbers (up to 5 phone numbers)
- Password Protection: Supports user-defined password for SMS commands to ensure secure operation
- Event Logging: Stores up to 10 event logs to track previous alarm events and user actions
Advanced Features
- Remote Configuration: Ability to remotely configure and control alarm settings via SMS commands
- GPRS Data Transfer: Supports GPRS data transmission for remote monitoring or integration with central monitoring stations
- Signal Strength Indicator: Displays the signal strength for network connectivity to ensure optimal performance
- Real-Time Status Updates: Sends updates on the system’s current status, such as active zones, armed/disarmed mode, etc.
- Output Control: Can control outputs, such as triggering relays or activating sirens, via remote SMS commands
Installation and Setup
- Installation: Easy installation with minimal configuration, typically connected directly to the control panel via the serial port
- SMS Command Set: Includes a comprehensive list of SMS commands for easy system operation and customization
- Dimensions: Compact and easy to integrate within existing alarm setups (approximately 110mm x 60mm x 25mm)
- Indicators: Features LED indicators for power, signal strength, GSM network status, and data transmission
- Mounting: Can be installed inside control panel enclosure or in a secure location for optimal GSM signal reception
Performance and Reliability
- Network Compatibility: Works reliably with most GSM providers (subject to GSM signal availability)
- Operating Temperature: Typically operates between -10°C to 50°C
- Humidity: Functional in environments with up to 90% relative humidity (non-condensing)
- Compliance: CE and RoHS certified, ensuring adherence to relevant environmental and safety standards
Secolink GSM GSV6U module
Original price was: KSh 16,000.KSh 15,000Current price is: KSh 15,000. ( Ex VAT )Original price was: KSh 16,000.KSh 15,000Current price is: KSh 15,000. ( Ex VAT ) Add to cart - -5%
General Features
- Models Available: KM20B (Wired) and KM20BT (Wireless)
- Type: LCD Keypad for Secolink Alarm Systems
- Keypad Interface: 16-character LCD display for clear status monitoring and system control
- Compatibility: Compatible with Secolink alarm control panels (PAS Series, GSV Series, etc.)
- Communication Type:
- KM20B: Wired connection (via RS485 bus)
- KM20BT: Wireless communication via 433MHz frequency (for integration with wireless alarm systems)
Performance and Functionality
- Zone Display: Displays the status of individual zones, including armed, disarmed, or fault
- User Management: Supports up to 32 user codes for easy management of multiple users
- Arming/Disarming: Facilitates arming and disarming of the system using user codes or remote control
- System Status: Real-time status information on the LCD, including alarm events, power status, and system errors
- Alarm Activation: Allows manual alarm triggering and panic button function for emergency situations
- Backlit Display: LCD screen is backlit for visibility in low-light conditions
- Keypad Lock: Auto-locking feature after a set number of incorrect entries to enhance security
- Sound/Audio Feedback: Audible feedback through beeps when keypresses are made and during status changes
Connectivity
- Wired Model (KM20B):
- RS485 connection to Secolink alarm control panels for data communication
- Cable Length: Can be installed up to 500 meters from the control panel
- Wireless Model (KM20BT):
- 433MHz Wireless frequency for communication with the alarm system
- Range: Typically up to 100 meters in open areas
- Frequency Hopping: Uses secure frequency hopping for interference-free operation
Security Features
- User Codes: Can be programmed for multiple users, with different access rights for each (e.g., admin, user, guest)
- Tamper Protection: Both models feature tamper protection to prevent unauthorized access or removal of the keypad
- Emergency/Panic Button: Built-in panic button for immediate alarm activation
- Passcode Entry: Secure passcode entry for arming/disarming the system
- Alarm History: Provides quick access to alarm logs for easy review of system events and incidents
Physical Specifications
- Dimensions (KM20B): Approx. 165mm x 115mm x 28mm
- Dimensions (KM20BT): Approx. 165mm x 115mm x 32mm
- Weight (KM20B): Approx. 200g
- Weight (KM20BT): Approx. 220g
- Mounting: Wall-mounted installation with a surface-mount design for easy setup
Power and Reliability
- Power Supply:
- KM20B: Powered by 12V DC via the control panel
- KM20BT: Powered by 3 x AA batteries (for wireless version)
- Power Consumption: Low power consumption for energy-efficient operation
- Battery Backup (KM20BT): Up to 1 year of battery life with typical use
- Operating Temperature: 0°C to 50°C (operates in a wide range of environments)
- Humidity: 5% to 90% RH, non-condensing
Secolink keypad KM20B and KM20BT
Original price was: KSh 11,000.KSh 10,500Current price is: KSh 10,500. ( Ex VAT )Original price was: KSh 11,000.KSh 10,500Current price is: KSh 10,500. ( Ex VAT ) Add to cart - -8%
General Features
- Model: PAS Series (e.g., PAS832, PAS816, PAS832/16)
- Type: Intruder Alarm Control Panel
- Zones: Available in configurations of 8, 16, 32, or 64 zones, offering flexibility for various system sizes
- Keypad: Supports connection to LED or LCD keypads
- Compatible with: Secolink's extensive range of detectors, sensors, and other alarm peripherals
- Control: Centralized control unit for managing alarm system operations, including arming, disarming, and zone management
- User Interface: Intuitive interface with LCD/LED display for easy status monitoring and system configuration
Performance and Functionality
- Zones: Multiple zones for monitoring various entry points and areas (up to 64 zones in some models)
- Communication: Supports GSM/GPRS or telephone line communication for remote monitoring and notifications
- Arming Modes: Full arm, partial arm, stay arm, and disarm modes for customizable security control
- Expandable: Expandable with additional zone expanders to increase coverage
- Alarm Logging: Event logging with date/time stamps for system diagnostics and investigation
- Alarm Triggering: Triggers alarms based on zone activity (e.g., door/window contacts, motion sensors, smoke detectors)
- Delayed Arming/Disarming: Configurable time delays for arming and disarming to accommodate user needs
- Alarm Outputs: Includes outputs for siren activation, strobe lights, and other external devices
Connectivity
- Remote Monitoring: Can be connected to GSM module for remote control via SMS and voice calls for notifications
- Communication Protocol: Supports standard alarm communication protocols such as Contact ID or SIA
- Phone Line Connection: Available versions support a PSTN (Public Switched Telephone Network) connection for reporting alarms
- Internet Connectivity: Some models can integrate with cloud-based systems for remote access and monitoring via mobile apps
Power and Reliability
- Power Supply: Operates on 12V DC, with backup battery support for continuous operation during power outages
- Battery Backup: Supports rechargeable 12V backup battery for up to 24 hours of standby power
- Current Draw: Low power consumption to ensure efficiency and minimal strain on the power supply
- Tamper Protection: Built-in tamper protection to prevent unauthorized access to the control panel
- Fail-Safe: Includes fail-safe operation to ensure the system remains functional during power interruptions or faults
Programming and Customization
- Programmable Zones: Zones can be individually programmed for various sensors and devices (e.g., motion detectors, contact sensors, panic buttons)
- Programmable Outputs: Outputs can be customized to activate different alarms, devices, or signals based on system conditions
- Event Logging: Detailed logging of system events, including alarm triggers, user actions, and system faults
- User Codes: Supports multiple user codes for easy user management and access control
- Zone Bypass: Zones can be bypassed temporarily for maintenance or specific security needs
- Remote Configuration: Some models support remote configuration via SMS or the internet for easy setup and adjustments
Security and Protection
- Anti-Tamper: Equipped with anti-tamper sensors that activate if the control panel is tampered with
- Integrated Keypad Lock: Built-in security features such as keypad lockout after multiple incorrect code attempts
- Secure Communications: Ensures secure communication through encryption or password protection for remote access
Secolink Intruder alarm panel PAS series
Original price was: KSh 25,000.KSh 23,000Current price is: KSh 23,000. ( Ex VAT )Original price was: KSh 25,000.KSh 23,000Current price is: KSh 23,000. ( Ex VAT ) Add to cart 
General Features:
-4.3-inch main color display with 480x272 resolution
-2x 2.8-inch side color displays for DSS keys
-6 SIP lines
-HD voice support on both handset and speakerphone
-G.722 wideband codec for high-definition audio
-Built-in Bluetooth for wireless headset support
-Phonebook with up to 1000 contacts
-Support for up to 60 DSS keys (3 pages of 20 keys each)
Keys and Indicators:
-20 DSS keys with dual-color LED indicators (configurable)
-6 line keys
-4 context-sensitive soft keys
-5 navigation keys
-Volume control keys
-Message waiting indicator (MWI)
-Headset key for quick activation
-Speakerphone key for hands
-free operation
Network and Connectivity:
-Dual Gigabit Ethernet ports (10/100/1000 Mbps)
-PoE (Power over Ethernet) support
-1 RJ9 port for handset
-1 RJ9 port for wired headset
-EHS (Electronic Hook Switch) support for wireless headsets
Audio Features:
-Full-duplex speakerphone with AEC
-Narrowband and wideband audio support
-Noise reduction technology
-Echo cancellation
-Voice codecs: G.711(A/μ), G.722, G.726, G.729AB, iLBC, Opus
-Adaptive jitter buffer -Comfort noise generation (CNG)
-Packet loss concealment (PLC)
Protocols and Standards:
-SIP v1 (RFC2543), SIP v2 (RFC3261)
-DTMF: In-band, Out-of-Band (RFC2833), SIP INFO
-Network protocols: IPv4, TCP/IP, UDP, ARP/RARP, ICMP, DNS, DHCP, NTP, HTTP/HTTPS, and more
Management:
Fanvil X6 Executive IP Phone
KSh 15,000 ( Ex VAT )KSh 15,000 ( Ex VAT ) Add to cart- -5%
- Display:
- 7-inch 800x480 color touch screen
- Keys:
- 20 programmable line keys with multi-color LEDs
- 6 soft keys
- 4 navigation keys (up, down, left, right)
- 8 dedicated function keys (e.g., call, end, menu, voicemail)
- Audio Codecs:
- G.711a/μ, G.729, G.722, G.723, G.726
- Voice Quality:
- HD (High Definition) audio
- Echo cancellation
- Noise reduction
- Hands-Free:
- Full-duplex speakerphone
- Headset:
- RJ-9 headset jack
- 3.5mm headset jack (optional with adapter)
- Network Connectivity:
- Dual 10/100/1000 Mbps Ethernet ports
- Power over Ethernet (PoE) support
- Optional external power adapter (5V DC, 2A)
- Protocols:
- SIP v2 (RFC 3261 compliant)
- Support for multiple SIP accounts (up to 20)
- Call Handling:
- Call transfer, call forwarding, call hold, 3-way conference calling, call waiting, caller ID
- Security:
- TLS, SRTP, HTTPS
- 802.1x network authentication
- Firmware:
- Remote firmware upgrade via TFTP/FTP/HTTP
- Dimensions:
- 8.3" x 7.0" x 5.0"
- Weight:
- Approx. 2.6 lbs
- Mounting:
- Desktop stand included
- Wall mountable (with optional bracket)
- Color:
- Black
Fanvil X4 Enterprise IP Phone
Original price was: KSh 10,000.KSh 9,500Current price is: KSh 9,500. ( Ex VAT )Original price was: KSh 10,000.KSh 9,500Current price is: KSh 9,500. ( Ex VAT ) Add to cart - Display:
- -7%
General Features
- Compatibility: Supports integration with various wireless alarm systems
- Frequency Range: 433 MHz or 868 MHz (depending on model)
- Communication Protocol: Secure encrypted transmission to prevent interference
Wireless Capability
- Device Pairing:
- Supports pairing with multiple wireless sensors (motion detectors, door/window contacts, smoke detectors, etc.)
- Typical capacity: 16-32 wireless devices, depending on model
- Range: Up to 100-300 meters (open field)
- Supervision: Monitors connected devices for signal loss or battery status
Outputs
- Relay Outputs:
- 1-4 programmable outputs for controlling external devices or integration with wired systems
- Output type: Normally Open (NO) or Normally Closed (NC)
- Alarm Trigger: Activates output upon alarm event
Power Requirements
- Input Voltage: 9-16V DC
- Power Consumption:
- Standby: ~50mA
- Active: ~150mA
Installation and Configuration
- Pairing Process: Simple pairing via onboard buttons or through a control panel interface
- Mounting Options: Wall or surface mountable with secure fixing points
Additional Features
- Tamper Protection: Alerts in case of unauthorized access or device removal
- LED Indicators: Provide status for signal reception, pairing, and alarms
- Firmware Updates: Over-the-air (OTA) or USB upgradeable
Environmental & Physical
- Operating Temperature: -10°C to +50°C
- Housing Material: Flame-retardant ABS plastic
- Dimensions: Compact, typically ~100mm x 70mm x 25mm
- Weight: Lightweight, ~100 grams
Wireless Alarm System Receiver
Original price was: KSh 14,000.KSh 13,000Current price is: KSh 13,000. ( Ex VAT )Original price was: KSh 14,000.KSh 13,000Current price is: KSh 13,000. ( Ex VAT ) Add to cart - -20%
General Features
- Type: Heavy-duty electromagnetic door lock (magnet)
- Model: Suitable for high-security applications, including commercial and industrial environments
- Material: Durable steel housing for enhanced strength and durability
- Design: Compact, sleek design for easy installation on doors and frames
Performance
- Holding Force:
- Up to 1200kg (2646 lbs) of holding force for high-security applications
- Reliable and secure magnetic locking, preventing unauthorized access
- Voltage:
- 12V DC or 24V DC options, depending on the specific model
- Compatible with various access control systems
- Current:
- 500mA at 12V DC and 250mA at 24V DC for efficient operation
- Temperature Range:
- -10°C to +55°C (14°F to 131°F) for operation in varied environments
- Power Consumption: Low power consumption for energy-efficient performance
Construction and Durability
- Casing:
- High-quality aluminium alloy casing for corrosion resistance and enhanced longevity
- Waterproof and weather-resistant for outdoor use in exposed environments
- Protection:
- Overload protection to prevent damage from electrical surges
- Short circuit protection for enhanced safety
Mounting and Installation
- Installation Type: Surface-mounted installation for easy setup on doors or frames
- Mounting Brackets: Includes adjustable mounting brackets to ensure proper alignment with door frames
- Compatible Door Types: Works with a variety of doors, including wooden, metal, and glass doors with suitable frames
- No Special Tools: Easy installation without the need for specialized tools or extensive setup
Security Features
- Fail-safe Mechanism:
- Magnetic lock remains engaged during power failure for continued security
- Ensures door remains locked even without power (depending on model)
- Emergency Release: Built-in manual release for emergency unlocking in case of power loss or system failure
- Anti-Tamper: Resistant to tampering and external manipulation, ensuring reliable security
Compliance and Certifications
- CE Certified: Meets European safety and environmental standards
- RoHS Compliant: Free from hazardous substances in line with RoHS regulations
Heavy Duty Door magnet
Original price was: KSh 1,000.KSh 800Current price is: KSh 800. ( Ex VAT )Original price was: KSh 1,000.KSh 800Current price is: KSh 800. ( Ex VAT ) Add to cart - -10%
General Features
- Compatibility: Works with various wireless alarm systems, home automation, and security devices
- Button Types: Typically includes arm, disarm, panic, and emergency buttons
- Frequency Range: 433 MHz or 868 MHz (depending on model)
- Encryption: Secure encrypted communication to prevent unauthorized access
Wireless Functionality
- Range: Effective range of 50-150 meters (depending on model and environment)
- Signal Transmission: Reliable signal transmission with minimal interference
- Battery: Typically powered by a long-life CR2032 or CR2025 lithium battery, providing up to 1-2 years of use
- Low Battery Indicator: Alerts the user when the battery needs replacing
Control and Buttons
- Button Count: Typically 1 to 4 programmable buttons for different functions
- Arm: Activates the alarm system
- Disarm: Deactivates the alarm system
- Panic: Sends an immediate alarm signal in case of emergency
- Emergency: Triggers a pre-configured emergency response (e.g., fire, medical)
- Button Design:
- Ergonomically designed for easy, one-handed use
- Backlit or tactile buttons for visibility and easy operation
- User Codes: Some models allow for programming of user-specific codes or commands for personalized control
Power and Durability
- Power Supply:
- Battery Type: CR2032/CR2025 lithium battery
- Power Consumption: Very low; designed for extended battery life
- Battery Life: Typically lasts up to 1-2 years, depending on usage
- Durability: Water-resistant and impact-resistant for reliable use in various environments
- Operating Temperature: -10°C to +50°C
Installation and Mounting
- Mounting: Can be carried in a pocket, attached to a keychain, or mounted on walls with an optional bracket
- Pairing Process: Simple pairing with compatible alarm control panels via a push-button or via the control panel's interface
Size and Dimensions
- Compact Design: Lightweight, typically 50mm x 35mm x 10mm
- Weight: Approx. 30-50 grams
Wireless remote Buttons
Original price was: KSh 2,000.KSh 1,800Current price is: KSh 1,800. ( Ex VAT )Original price was: KSh 2,000.KSh 1,800Current price is: KSh 1,800. ( Ex VAT ) Add to cart - -17%
General Features
- Function: Instantly triggers an alarm in case of emergency with a single press
- Type: Fixed, non-portable button typically mounted on walls or surfaces
- Activation: Manual activation with a push-button mechanism
- Signal Output: Sends an immediate signal to the connected alarm system or central monitoring station
- Indication: LED indicators to confirm button status (e.g., standby or triggered)
Design and Build
- Mounting Type: Wall-mounted, typically installed near exits or in easily accessible areas
- Material: Durable, impact-resistant plastic or metal housing for long-lasting use
- Size: Compact design, typically 80mm x 80mm x 30mm
- Weight: Approx. 100-200 grams
- Color: Often bright red or yellow for high visibility in emergencies
Power and Operation
- Power Supply: Typically 12V DC or 24V DC powered from the main control panel
- Power Consumption: Low power consumption for extended use
- Battery Backup: Some models come with battery backup to ensure operation during power failures
- LED Indicators: Built-in LEDs indicate the device’s operational status (e.g., standby, activated)
Fixed Panic Buttons alarm
Original price was: KSh 600.KSh 500Current price is: KSh 500. ( Ex VAT )Original price was: KSh 600.KSh 500Current price is: KSh 500. ( Ex VAT ) Add to cart - -7%
General Features
- Type: GSM-based control panel for alarm systems
- Model: GSM Control Panel
- Communication Technology: GSM (Global System for Mobile Communications)
- Connectivity: Connects via SMS or Voice Call
- Supports: Allows remote control and monitoring of security systems via mobile phone
- Functionality: Enables arming, disarming, and status updates remotely
- Alarm Trigger: Sends SMS alerts or voice calls in case of alarm activation
- Channels: Typically supports 4-16 zones for wired or wireless sensors
- Power Supply: Operates on 12V DC (with backup battery support)
- Backup Power: Includes backup battery for continued operation during power outages
- Temperature Range: Operates in a temperature range of -10°C to +50°C
- Humidity Range: Typically supports 5% to 95% RH (non-condensing)
Key Features
- Mobile Phone Control: Remotely arm, disarm, or reset the system using SMS or voice commands
- Zone Configuration: Supports wired or wireless zones, depending on the model
- SMS Alerts: Sends SMS alerts for various events such as alarm triggers, system disarming, or zone status changes
- Voice Calls: Option to receive voice call notifications on pre-programmed phone numbers
- Event Logs: Stores up to 100 event logs to track system history (alarm triggers, arm/disarm times)
- Multiple Users: Allows multiple users to control the system with unique passwords or PIN codes
- Remote Monitoring: Monitor system status remotely via SMS or through a dedicated mobile app (if supported)
- Time-Based Control: Set up time-based triggers to automate arming or disarming of the system
- User Access Control: Allows for up to 8 users with individual codes for secure system access
- SMS Password Reset: Allows users to reset system access password via SMS if needed
- Customizable Alerts: Configure custom SMS messages for different alarm conditions or system events
Sensor Compatibility
- Wired Zones: Supports wired PIR motion detectors, door/window contacts, panic buttons, and more
- Wireless Zones: Compatible with various wireless sensors (depending on model)
- Pet Immunity: Compatible with pet-immune motion detectors (depending on model)
- Alarm Inputs: Accepts standard alarm input signals (dry contact) from detectors
Security Features
- Tamper Protection: Built-in tamper protection to prevent unauthorized access or tampering with the panel
- Password Protected: Requires a password for system access and configuration changes
- Alarm Reset: Allows system reset via SMS or voice call after alarm activation
- Overload Protection: Includes overload protection to prevent damage from power surges
- Backup Battery: Ensures the system continues functioning in case of power failure (typically includes 7Ah to 12Ah battery)
Installation & Setup
- Mounting: Designed for wall-mounting with mounting holes for easy installation
- Connection: Compatible with wired and wireless security sensors, detectors, and accessories
- SMS Configuration: Configure the panel remotely via SMS commands for ease of setup
- Mobile App (if supported): Some models support dedicated mobile apps for configuration and monitoring
- SIM Card Slot: Requires an active SIM card for GSM communication (supports various carriers)
Environmental Features
- Operating Temperature: Typically works in the range of -10°C to +50°C
- Humidity: Functional in environments with 5% to 95% RH
- Weather Protection: Designed for indoor use, though some models may offer weather-resistant enclosures for outdoor installations
Certifications & Compliance
- Safety: CE, UL, and RoHS certifications for safety and compliance with environmental standards
- EMC Compliance: Certified for electromagnetic compatibility to reduce interference with other devices
GSM Control Panel
Original price was: KSh 15,000.KSh 14,000Current price is: KSh 14,000. ( Ex VAT )Original price was: KSh 15,000.KSh 14,000Current price is: KSh 14,000. ( Ex VAT ) Add to cart - -14%
General Features
- Siren Type: High-pitched, loud electronic siren
- Sound Output: Typically 110 dB to 130 dB for maximum audibility
- Alarm Function: Emits loud sound when triggered by security system or motion detector
- Flash Function: Often includes a flashing strobe light to visually alert during alarms
- Control Method: Wired or wireless connection to alarm panel or sensors
- Activation Method: Activated by motion detection, door/window sensors, or manual panic button
Power Supply
- Power Source: Typically 12V DC or 24V DC from a central alarm panel or power adapter
- Backup Power: Some kits include backup battery (usually 7.2V to 12V rechargeable) for continued operation during power outages
- Low Power Consumption: Designed to operate efficiently, conserving power when in standby mode
Design and Build
- Enclosure: Durable, weather-resistant housing (IP65 or higher) suitable for indoor and outdoor use
- Material: ABS plastic or metal housing for enhanced protection against tampering and physical damage
- Mounting: Can be mounted on walls or ceilings, typically at a height of 2 to 4 meters
- Dimensions: Varies by model but typically 160mm x 120mm x 50mm
- Weight: Typically 300-500 grams depending on design
Sound and Visual Alerts
- Siren Tone: Adjustable sound frequencies, with some models offering multiple sound patterns (e.g., wailing, pulsing, steady)
- Volume Control: Adjustable volume for tailoring sound output based on environment
- Strobe Light: Bright LED strobe light (typically flashes 60-100 times per minute) to alert individuals in noisy environments
- Flashing Pattern: Adjustable strobe light flashing pattern in some models
Connectivity
- Wired or Wireless: Available in both wired and wireless models for flexible installation
- Wireless Frequency: Typically 433 MHz, 868 MHz, or 915 MHz for wireless versions
- Range: Wireless sirens typically offer a signal range of 100 to 300 meters (depending on environment)
- Signal Reception: Reliable signal reception to trigger the alarm even in large or obstructed areas
Security Features
- Tamper Protection: Integrated tamper switch that triggers an alert if the siren is removed or tampered with
- Vandal-Resistant: Designed to resist physical tampering or vandalism
- Anti-jamming: Wireless models often include anti-jamming features to prevent signal interference
- Weatherproof: Designed to resist harsh weather conditions for outdoor installation
Installation and Setup
- Easy Installation: Includes mounting brackets or adhesive pads for quick, secure installation
- Installation Height: Recommended mounting height of 2-4 meters for optimal sound and light projection
- Range: Can cover a wide area, depending on the model, with some providing up to 300 meters of wireless range
- Control Panel Integration: Integrates with most standard alarm control panels
Security Siren Alarm Kit
Original price was: KSh 3,500.KSh 3,000Current price is: KSh 3,000. ( Ex VAT )Original price was: KSh 3,500.KSh 3,000Current price is: KSh 3,000. ( Ex VAT ) Add to cart - -25%
General Features
- Model: RK210-PR
- Type: Passive Infrared (PIR) Motion Detector with Pet Immunity
- Pet Immunity: Designed to ignore pets up to 25kg (55 lbs), minimizing false alarms from small to medium-sized animals
- Detection Range: Typically 12 meters (40 feet) with an adjustable coverage area
- Detection Angle: 90° to 110° horizontal detection angle, depending on model
- Technology: Dual PIR sensors (for enhanced detection)
- Sensitivity: Adjustable sensitivity for fine-tuning detection performance
- Alarm Output: Sends a signal to the alarm system when motion is detected
Design and Build
- Mounting: Wall-mounted design for installation at 2.2 to 2.4 meters (7 to 8 feet) above the floor
- Dimensions: Typically 100mm x 60mm x 50mm
- Weight: Approx. 150-200 grams
- Color: White, discreet design to blend into various environments
- Housing: Made from high-quality, durable plastic for long-lasting performance
- Tamper Protection: Built-in tamper protection to prevent unauthorized removal or tampering
Detection Technology
- Sensor Type: Dual PIR sensors for enhanced accuracy and reduced false alarms
- Pet Immunity: Intelligent detection algorithm to ignore small to medium-sized pets, such as dogs and cats, under 25kg
- Sensitivity Adjustment: Allows customization of sensitivity levels to minimize false alarms based on environmental factors or pet activity
- Detection Speed: Capable of detecting motion in as little as 0.2 to 0.3 seconds
- Detection Area: Adjustable detection zone with a range of up to 12 meters in radius
Power and Operation
- Power Supply: Typically powered by 9V or 12V DC
- Power Consumption: Low power consumption for long-term operation
- Battery: Can include battery backup (if applicable), depending on the model
- Standby Current: Typically 5mA
- Alarm Current: Typically 30mA to 50mA
Installation and Mounting
- Mounting Height: Typically 2.2 to 2.4 meters (7 to 8 feet) for optimal performance
- Easy Installation: Includes mounting bracket or screws for secure wall mounting
- Adjustable Coverage: Detection angle and range can be adjusted to suit the area being protected
- Connection Type: Typically wired to alarm panels via hard-wired connections
Environmental Features
- Temperature Range: Operates in a temperature range of -10°C to +50°C
- Humidity Range: Typically operates in humidity ranges of 5% to 95% RH (non-condensing)
- Weather Resistance: Suitable for indoor use, with protection against dust and humidity in typical environments
Certifications
- Safety: CE, UL, and RoHS certified for safety, environmental compliance, and performance standards
Pet Immunity Motion Detector RK210-PR
Original price was: KSh 2,000.KSh 1,500Current price is: KSh 1,500. ( Ex VAT )Original price was: KSh 2,000.KSh 1,500Current price is: KSh 1,500. ( Ex VAT ) Add to cart - -13%
General Features
- Detection Type: Passive Infrared (PIR) sensor for motion detection
- Detection Range: Up to 15-30 meters (depending on model and environment)
- Detection Angle: Typically 90° to 120°
- Sensitivity Adjustment: Adjustable sensitivity to suit environmental conditions
- Alarm Output: Sends a signal to the alarm system when motion is detected
Environmental Protection
- Weatherproof Rating: IP65 or higher, ensuring protection from rain, dust, and other harsh outdoor conditions
- Operating Temperature: -20°C to +50°C, suitable for a variety of climates
- UV Resistant: Housing designed to resist damage from UV exposure
Power Requirements
- Power Supply: Powered by 9V to 12V DC, with low power consumption
- Power Consumption: Typically around 10mA in standby and 15-30mA when active
- Battery Option: Some models offer battery backup for uninterrupted operation during power outages
Detection and Sensitivity
- Pet Immunity: Some models feature pet immunity, detecting only human-sized movements (up to 25 kg or 50 lbs)
- Adjustable Detection Range: Allows customization of the range for more precise detection
- Multi-Level Sensitivity: Adjustable sensitivity for detecting motion in areas with high traffic or in areas requiring more sensitivity
Mounting and Installation
- Mounting Options: Wall-mounted or pole-mounted, with adjustable brackets for optimal angle configuration
- Installation Height: Recommended installation height typically 2-3 meters (6-10 feet) for optimal coverage
- Easy Setup: Quick and simple installation with included mounting hardware
Additional Features
- Anti-Masking Technology: Detects attempts to block or cover the sensor to prevent false alarms
- Tamper Protection: Alerts when the detector is tampered with or moved
- LED Indicators: Built-in LED lights to show system status (e.g., power, detection)
Physical and Environmental Characteristics
- Housing Material: Durable, impact-resistant plastic or ABS material for long-lasting performance
- Dimensions: Typically 110mm x 70mm x 55mm
- Weight: Approximately 150-250 grams
Outdoor Motion Detector
Original price was: KSh 8,000.KSh 7,000Current price is: KSh 7,000. ( Ex VAT )Original price was: KSh 8,000.KSh 7,000Current price is: KSh 7,000. ( Ex VAT ) Add to cart