APC 3KVA Easy UPS On-Line, 3kVA/2400W, Rackmount 2U, 230V, 6x IEC C13 + 1x IEC C19 outlets UPS, SRV3KRI
The APC Easy UPS On-Line SRV3KRI is a high-performance 3kVA/2400W rackmount UPS designed to provide reliable power protection for critical equipment. With its on-line double-conversion technology, it delivers clean and continuous power by converting incoming AC power to DC and then back to AC.
This UPS offers a 230V input and output voltage, making it suitable for a wide range of applications. It features a built-in sealed lead-acid battery that provides backup power during utility outages, with a typical recharge time of 3 hours.
High quality, Double-conversion On-line UPS designed for essential power protection needs even in the most unstable power conditions.
APC 3KVA UPS Specification
- Model: SRV3KRI
- Capacity: 3kVA/2400W
- Topology: On-Line double-conversion
- Input Voltage: 230V
- Output Voltage: 230V
- Form Factor: Rackmount 2U
- Battery Type: Sealed lead-acid
- Typical Recharge Time: 3 hours
- Communication Ports: USB, SmartSlot
- Surge Protection: Yes
- Automatic Voltage Regulation (AVR): Yes
- Efficiency: Up to 94%
- Operating Temperature: 0°C to 40°C
- Audible Alarm: Yes
- LCD Display: Yes
- Dimensions (H x W x D): 86.5mm x 432mm x 552mm.
- Weight: 26.5kg
- Warranty: 2 years
- Suitable for: Data centers, server rooms, and other demanding environments.
Features
Automatic internal bypass
Pure static bypass switch without bridging contactor securing a fast and reliable transfer to and from bypass, rated for 125% nominal load.
Input power factor correction
Minimizes installation costs by enabling the use of smaller generators and cabling.
Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.
ECO Mode
Operating mode that by-passes unused electrical components in good power conditions to achieve high operating efficiency without sacrificing protection
Serial connectivity
Provides management of the UPS via a serial port.
USB connectivity
Provides management of the UPS via a USB port (not available on all models).
Automatic restart of loads after UPS shutdown
Automatically starts up the connected equipment upon the return of utility power.
Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.
Intelligent Card Slot
Customize UPS capabilities with management cards.
Technical Specifications
Output
Max Configurable Power (Watts): 2.4kWatts / 3.0kVA
Efficiency at Full Load: 88.0 %
Output Voltage Distortion: 3 %
Output Frequency (sync to mains): 50/60 Hz +/- 3 Hz Sync to mains
Other Output Voltages: 220 V, 240 V
Load Crest Factor: 3 : 1
Topology: Double conversion online
Waveform type: Sine wave
Bypass: Internal bypass (automatic and manual)
Input
Input frequency: 40 – 70 Hz Auto sensing
Input voltage range for main operations: 110 – 285 Half load, 160 – 280 Full loadV
Number of Power Cords: 1
Efficiency at Full Load: 88.0 %
Other Input Voltages: 220 V, 240 V
Batteries & Runtime
Battery type: Lead-acid battery
Typical recharge time: 4hour(s)
Nominal Battery Voltage: 72 V
Expected Battery Life (years): 3 – 5
Battery Charge Power (Watts): 60 Watts
Communications & Management
Interface Port(s): DB-9 RS-232, USB
Control panel: Multifunction LCD status and control console
Audible Alarm: Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm
Available SmartSlot™ Interface Quantity: 1
Surge Protection and Filtering
Surge energy rating: 600Joules
Environmental
Operating Temperature: 0 – 40 °C
Operating Relative Humidity: 0 – 95 (Non-condensing) %
Operating Elevation: 0 – 3000meters
Storage Temperature: -20 – 50 °C
Storage Relative Humidity: 0 – 95 (Non-condensing) %
Storage Elevation: 0 – 15000meters
Audible noise at 1 meter from surface of unit: 50.0dBA
Online thermal dissipation: 910.0BTU/hr
Protection Class: IP20
Physical
Dimensions (W x D x H): 437mm x 632mm x 86mm
Weight: 27.6 kg (60.8 lbs)
Reviews
There are no reviews yet.